7:10:59 PM - ----------------------------------------
7:10:59 PM - Startup Sequence
7:10:59 PM - ----------------------------------------
7:10:59 PM - Starting up...
7:10:59 PM - File prefix for tonight is: k260127-
7:11:04 PM - Dome is already closed
7:11:10 PM - Current sun altitude: -25.1598
7:11:10 PM - Sun is low enough, good to observe!
7:11:10 PM - Bug light turned off
7:11:16 PM - PWI4 opened
7:13:41 PM - Dome homed
7:13:41 PM - Camera is cooled
7:13:42 PM - ----------------------------------------
7:13:42 PM - Bias Frame Acquisition
7:13:42 PM - ----------------------------------------
7:13:43 PM - New destination read in target list: C:\Users\Bell\Data\.
7:13:43 PM - New observer read in target list: Bell Observatory.
7:13:43 PM - Changing image type to BiasFrame
7:13:43 PM - New object read in target list: BIAS.
7:13:43 PM - DMSToDegrees az from TargetList is 182
7:13:43 PM - Given (unmodded) az from TargetList is 182d 0m 0s
7:13:43 PM - Hasaz value after reading az line from target list: True
7:13:43 PM - DMSToDegrees alt from TargetList is 20
7:13:43 PM - Given (unmodded) alt from TargetList is 20d 0m 0s
7:13:43 PM - Hasalt value after reading alt line from target list: True
7:13:43 PM - Changing filter to position 5.
7:13:43 PM - ----------------------------------------
7:13:43 PM - Beginning Frame #0Acquisition
7:13:43 PM - ----------------------------------------
7:13:43 PM - Object from target list used for altcheck in EXP command is BIAS
7:13:43 PM - HasRA and HasDec at beginning of EXP command: False and False
7:13:43 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:13:43 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:13:43 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:13:43 PM - BIAS/FLAT Object Alt: 20
7:13:45 PM - Dome azimuth is 298 degrees.  Object azimuth is 20 degrees.
7:13:45 PM - Imaging sky for 5 seconds.
7:13:48 PM - Current sun altitude: -25.6832
7:13:48 PM - Sun is low enough, good to observe!
7:13:48 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:13:48 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:13:48 PM - Exposing image C:\Users\Bell\Data\k260127-0001.fit
7:13:48 PM - PWI Status page writing to logtest file
7:13:48 PM - Writing mount apparent RA: 01:58:01.55121678516
7:13:48 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:13:48 PM - Writing mount J2000 RA: 01:37:39.3304779912
7:13:48 PM - Writing mount J2000 Dec: 04:25:20.63928025938
7:13:48 PM - Dome going to scope azimuth: 231.296552759859
7:13:58 PM - Starting image save...
7:14:00 PM - Saved image C:\Users\Bell\Data\k260127-0001.fit
7:14:00 PM - ----------------------------------------
7:14:00 PM - Beginning Frame #1Acquisition
7:14:00 PM - ----------------------------------------
7:14:00 PM - Object from target list used for altcheck in EXP command is BIAS
7:14:00 PM - HasRA and HasDec at beginning of EXP command: False and False
7:14:00 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:14:00 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:14:00 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:14:00 PM - BIAS/FLAT Object Alt: 20
7:14:02 PM - Dome azimuth is 253.81 degrees.  Object azimuth is 20 degrees.
7:14:02 PM - Imaging sky for 5 seconds.
7:14:05 PM - Current sun altitude: -25.7388
7:14:05 PM - Sun is low enough, good to observe!
7:14:05 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:14:05 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:14:05 PM - Exposing image C:\Users\Bell\Data\k260127-0002.fit
7:14:05 PM - PWI Status page writing to logtest file
7:14:05 PM - Writing mount apparent RA: 01:02:13.85008286064
7:14:05 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:14:05 PM - Writing mount J2000 RA: 01:41:51.55907376444
7:14:05 PM - Writing mount J2000 Dec: 04:25:20.899281924012
7:14:05 PM - Dome going to scope azimuth: 231.296552759859
7:14:11 PM - Starting image save...
7:14:12 PM - Saved image C:\Users\Bell\Data\k260127-0002.fit
7:14:12 PM - ----------------------------------------
7:14:12 PM - Beginning Frame #2Acquisition
7:14:12 PM - ----------------------------------------
7:14:12 PM - Object from target list used for altcheck in EXP command is BIAS
7:14:12 PM - HasRA and HasDec at beginning of EXP command: False and False
7:14:12 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:14:12 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:14:12 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:14:12 PM - BIAS/FLAT Object Alt: 20
7:14:14 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:14:14 PM - Imaging sky for 5 seconds.
7:14:17 PM - Current sun altitude: -25.7786
7:14:17 PM - Sun is low enough, good to observe!
7:14:17 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:14:17 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:14:17 PM - Exposing image C:\Users\Bell\Data\k260127-0003.fit
7:14:17 PM - PWI Status page writing to logtest file
7:14:17 PM - Writing mount apparent RA: 01:05:14.10228817476
7:14:17 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:14:17 PM - Writing mount J2000 RA: 01:44:51.76108678884
7:14:17 PM - Writing mount J2000 Dec: 04:25:21.085478576076
7:14:17 PM - Dome going to scope azimuth: 231.296552759859
7:14:23 PM - Starting image save...
7:14:24 PM - Saved image C:\Users\Bell\Data\k260127-0003.fit
7:14:24 PM - ----------------------------------------
7:14:24 PM - Beginning Frame #3Acquisition
7:14:24 PM - ----------------------------------------
7:14:24 PM - Object from target list used for altcheck in EXP command is BIAS
7:14:24 PM - HasRA and HasDec at beginning of EXP command: False and False
7:14:24 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:14:24 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:14:24 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:14:24 PM - BIAS/FLAT Object Alt: 20
7:14:26 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:14:26 PM - Imaging sky for 5 seconds.
7:14:29 PM - Current sun altitude: -25.8189
7:14:29 PM - Sun is low enough, good to observe!
7:14:29 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:14:29 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:14:29 PM - Exposing image C:\Users\Bell\Data\k260127-0004.fit
7:14:29 PM - PWI Status page writing to logtest file
7:14:29 PM - Writing mount apparent RA: 01:08:16.73091499272
7:14:29 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:14:29 PM - Writing mount J2000 RA: 01:47:54.33886946724
7:14:29 PM - Writing mount J2000 Dec: 04:25:21.274504927716
7:14:29 PM - Dome going to scope azimuth: 231.296552759859
7:14:36 PM - Starting image save...
7:14:36 PM - Saved image C:\Users\Bell\Data\k260127-0004.fit
7:14:36 PM - ----------------------------------------
7:14:36 PM - Beginning Frame #4Acquisition
7:14:36 PM - ----------------------------------------
7:14:36 PM - Object from target list used for altcheck in EXP command is BIAS
7:14:36 PM - HasRA and HasDec at beginning of EXP command: False and False
7:14:36 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:14:36 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:14:36 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:14:36 PM - BIAS/FLAT Object Alt: 20
7:14:38 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:14:38 PM - Imaging sky for 5 seconds.
7:14:41 PM - Current sun altitude: -25.8589
7:14:41 PM - Sun is low enough, good to observe!
7:14:41 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:14:41 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:14:41 PM - Exposing image C:\Users\Bell\Data\k260127-0005.fit
7:14:41 PM - PWI Status page writing to logtest file
7:14:41 PM - Writing mount apparent RA: 01:11:17.67541118172
7:14:41 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:14:41 PM - Writing mount J2000 RA: 01:50:55.23300022632
7:14:41 PM - Writing mount J2000 Dec: 04:25:21.46216016514
7:14:41 PM - Dome going to scope azimuth: 231.296552759859
7:14:48 PM - Starting image save...
7:14:48 PM - Saved image C:\Users\Bell\Data\k260127-0005.fit
7:14:48 PM - ----------------------------------------
7:14:48 PM - Beginning Frame #5Acquisition
7:14:48 PM - ----------------------------------------
7:14:48 PM - Object from target list used for altcheck in EXP command is BIAS
7:14:48 PM - HasRA and HasDec at beginning of EXP command: False and False
7:14:48 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:14:48 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:14:48 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:14:48 PM - BIAS/FLAT Object Alt: 20
7:14:50 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:14:50 PM - Imaging sky for 5 seconds.
7:14:53 PM - Current sun altitude: -25.9
7:14:53 PM - Sun is low enough, good to observe!
7:14:53 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:14:53 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:14:53 PM - Exposing image C:\Users\Bell\Data\k260127-0006.fit
7:14:53 PM - PWI Status page writing to logtest file
7:14:53 PM - Writing mount apparent RA: 01:14:21.58211340348
7:14:53 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:14:53 PM - Writing mount J2000 RA: 01:53:59.0885225736
7:14:53 PM - Writing mount J2000 Dec: 04:25:21.653266752768
7:14:53 PM - Dome going to scope azimuth: 231.296552759859
7:15:00 PM - Starting image save...
7:15:00 PM - Saved image C:\Users\Bell\Data\k260127-0006.fit
7:15:00 PM - ----------------------------------------
7:15:00 PM - Beginning Frame #6Acquisition
7:15:00 PM - ----------------------------------------
7:15:00 PM - Object from target list used for altcheck in EXP command is BIAS
7:15:00 PM - HasRA and HasDec at beginning of EXP command: False and False
7:15:00 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:15:00 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:15:00 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:15:00 PM - BIAS/FLAT Object Alt: 20
7:15:03 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:15:03 PM - Imaging sky for 5 seconds.
7:15:06 PM - Current sun altitude: -25.94
7:15:06 PM - Sun is low enough, good to observe!
7:15:06 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:15:06 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:15:06 PM - Exposing image C:\Users\Bell\Data\k260127-0007.fit
7:15:06 PM - PWI Status page writing to logtest file
7:15:06 PM - Writing mount apparent RA: 01:17:24.76747762404
7:15:06 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:15:06 PM - Writing mount J2000 RA: 01:57:02.22291780444
7:15:06 PM - Writing mount J2000 Dec: 04:25:21.844003729008
7:15:06 PM - Dome going to scope azimuth: 231.296552759859
7:15:12 PM - Starting image save...
7:15:13 PM - Saved image C:\Users\Bell\Data\k260127-0007.fit
7:15:13 PM - ----------------------------------------
7:15:13 PM - Beginning Frame #7Acquisition
7:15:13 PM - ----------------------------------------
7:15:13 PM - Object from target list used for altcheck in EXP command is BIAS
7:15:13 PM - HasRA and HasDec at beginning of EXP command: False and False
7:15:13 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:15:13 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:15:13 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:15:13 PM - BIAS/FLAT Object Alt: 20
7:15:15 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:15:15 PM - Imaging sky for 5 seconds.
7:15:18 PM - Current sun altitude: -25.9806
7:15:18 PM - Sun is low enough, good to observe!
7:15:18 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:15:18 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:15:18 PM - Exposing image C:\Users\Bell\Data\k260127-0008.fit
7:15:18 PM - PWI Status page writing to logtest file
7:15:18 PM - Writing mount apparent RA: 01:20:28.659656283
7:15:18 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:15:18 PM - Writing mount J2000 RA: 01:00:06.06394102968
7:15:18 PM - Writing mount J2000 Dec: 04:25:22.035857923524
7:15:18 PM - Dome going to scope azimuth: 231.296552759859
7:15:24 PM - Starting image save...
7:15:25 PM - Saved image C:\Users\Bell\Data\k260127-0008.fit
7:15:25 PM - ----------------------------------------
7:15:25 PM - Beginning Frame #8Acquisition
7:15:25 PM - ----------------------------------------
7:15:25 PM - Object from target list used for altcheck in EXP command is BIAS
7:15:25 PM - HasRA and HasDec at beginning of EXP command: False and False
7:15:25 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:15:25 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:15:25 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:15:25 PM - BIAS/FLAT Object Alt: 20
7:15:27 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:15:27 PM - Imaging sky for 5 seconds.
7:15:30 PM - Current sun altitude: -26.0208
7:15:30 PM - Sun is low enough, good to observe!
7:15:30 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:15:30 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:15:30 PM - Exposing image C:\Users\Bell\Data\k260127-0009.fit
7:15:30 PM - PWI Status page writing to logtest file
7:15:30 PM - Writing mount apparent RA: 01:23:30.89735660472
7:15:30 PM - Writing mount apparent Dec: 04:33:17.724623522076
7:15:30 PM - Writing mount J2000 RA: 01:03:08.25095630268
7:15:30 PM - Writing mount J2000 Dec: 04:25:22.226362716252
7:15:30 PM - Dome going to scope azimuth: 231.296552759859
7:15:36 PM - Starting image save...
7:15:37 PM - Saved image C:\Users\Bell\Data\k260127-0009.fit
7:15:37 PM - End of BiasList.txt.
7:15:37 PM - ----------------------------------------
7:15:37 PM - Flat Field Frame Acquisition
7:15:37 PM - ----------------------------------------
7:15:54 PM - Flat field outlet turned on
7:15:58 PM - New destination read in target list: C:\Users\Bell\Data\.
7:15:58 PM - New observer read in target list: Bell Observatory.
7:15:58 PM - Changing image type to FlatField
7:15:58 PM - New object read in target list: FLAT.
7:15:58 PM - DMSToDegrees az from TargetList is 182
7:15:58 PM - Given (unmodded) az from TargetList is 182d 0m 0s
7:15:58 PM - Hasaz value after reading az line from target list: True
7:15:58 PM - DMSToDegrees alt from TargetList is 20
7:15:58 PM - Given (unmodded) alt from TargetList is 20d 0m 0s
7:15:58 PM - Hasalt value after reading alt line from target list: True
7:15:58 PM - Changing Flat Field Screen light power to 60
7:15:58 PM - From target list, waiting for 2 seconds.
7:16:00 PM - Changing filter to position 0.
7:16:00 PM - ----------------------------------------
7:16:00 PM - Beginning Frame #0Acquisition
7:16:00 PM - ----------------------------------------
7:16:00 PM - Object from target list used for altcheck in EXP command is FLAT
7:16:00 PM - HasRA and HasDec at beginning of EXP command: False and False
7:16:00 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:16:00 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:16:00 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:16:00 PM - BIAS/FLAT Object Alt: 20
7:16:02 PM - Dome azimuth is 231.22 degrees.  Object azimuth is 20 degrees.
7:16:02 PM - Imaging sky for 20 seconds.
7:16:05 PM - Current sun altitude: -26.1366
7:16:05 PM - Sun is low enough, good to observe!
7:16:05 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:16:05 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:16:05 PM - Exposing image C:\Users\Bell\Data\k260127-0010.fit
7:16:05 PM - PWI Status page writing to logtest file
7:16:05 PM - Writing mount apparent RA: 03:30:20.11006969848
7:16:05 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:16:05 PM - Writing mount J2000 RA: 03:14:44.7881835894
7:16:05 PM - Writing mount J2000 Dec: -33:10:25.36924408932
7:16:05 PM - Dome going to scope azimuth: 181.999775086026
7:16:31 PM - Starting image save...
7:16:32 PM - Saved image C:\Users\Bell\Data\k260127-0010.fit
7:16:32 PM - ----------------------------------------
7:16:32 PM - Beginning Frame #1Acquisition
7:16:32 PM - ----------------------------------------
7:16:32 PM - Object from target list used for altcheck in EXP command is FLAT
7:16:32 PM - HasRA and HasDec at beginning of EXP command: False and False
7:16:32 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:16:32 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:16:32 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:16:32 PM - BIAS/FLAT Object Alt: 20
7:16:34 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:16:34 PM - Imaging sky for 20 seconds.
7:16:37 PM - Current sun altitude: -26.2424
7:16:37 PM - Sun is low enough, good to observe!
7:16:37 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:16:37 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:16:37 PM - Exposing image C:\Users\Bell\Data\k260127-0011.fit
7:16:37 PM - PWI Status page writing to logtest file
7:16:37 PM - Writing mount apparent RA: 03:38:19.3484132754
7:16:37 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:16:37 PM - Writing mount J2000 RA: 03:22:44.42522899224
7:16:37 PM - Writing mount J2000 Dec: -33:10:24.37214914452
7:16:37 PM - Dome going to scope azimuth: 181.999775086026
7:16:58 PM - Starting image save...
7:16:59 PM - Saved image C:\Users\Bell\Data\k260127-0011.fit
7:16:59 PM - ----------------------------------------
7:16:59 PM - Beginning Frame #2Acquisition
7:16:59 PM - ----------------------------------------
7:16:59 PM - Object from target list used for altcheck in EXP command is FLAT
7:16:59 PM - HasRA and HasDec at beginning of EXP command: False and False
7:16:59 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:16:59 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:16:59 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:16:59 PM - BIAS/FLAT Object Alt: 20
7:17:01 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:17:01 PM - Imaging sky for 20 seconds.
7:17:04 PM - Current sun altitude: -26.3323
7:17:04 PM - Sun is low enough, good to observe!
7:17:04 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:17:04 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:17:04 PM - Exposing image C:\Users\Bell\Data\k260127-0012.fit
7:17:04 PM - PWI Status page writing to logtest file
7:17:04 PM - Writing mount apparent RA: 03:45:06.57095871708
7:17:04 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:17:04 PM - Writing mount J2000 RA: 03:29:31.98539346252
7:17:04 PM - Writing mount J2000 Dec: -33:10:23.52367160616
7:17:04 PM - Dome going to scope azimuth: 181.999775086026
7:17:25 PM - Starting image save...
7:17:26 PM - Saved image C:\Users\Bell\Data\k260127-0012.fit
7:17:26 PM - Changing filter to position 1.
7:17:26 PM - ----------------------------------------
7:17:26 PM - Beginning Frame #3Acquisition
7:17:26 PM - ----------------------------------------
7:17:26 PM - Object from target list used for altcheck in EXP command is FLAT
7:17:26 PM - HasRA and HasDec at beginning of EXP command: False and False
7:17:26 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:17:26 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:17:26 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:17:26 PM - BIAS/FLAT Object Alt: 20
7:17:28 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:17:28 PM - Imaging sky for 100 seconds.
7:17:31 PM - Current sun altitude: -26.4222
7:17:31 PM - Sun is low enough, good to observe!
7:17:31 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:17:31 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:17:31 PM - Exposing image C:\Users\Bell\Data\k260127-0013.fit
7:17:31 PM - PWI Status page writing to logtest file
7:17:31 PM - Writing mount apparent RA: 03:51:54.21408294708
7:17:31 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:17:31 PM - Writing mount J2000 RA: 03:36:19.96540802784
7:17:31 PM - Writing mount J2000 Dec: -33:10:22.67320103976
7:17:31 PM - Dome going to scope azimuth: 181.999775086026
7:19:13 PM - Starting image save...
7:19:14 PM - Saved image C:\Users\Bell\Data\k260127-0013.fit
7:19:14 PM - ----------------------------------------
7:19:14 PM - Beginning Frame #4Acquisition
7:19:14 PM - ----------------------------------------
7:19:14 PM - Object from target list used for altcheck in EXP command is FLAT
7:19:14 PM - HasRA and HasDec at beginning of EXP command: False and False
7:19:14 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:19:14 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:19:14 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:19:14 PM - BIAS/FLAT Object Alt: 20
7:19:16 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:19:16 PM - Imaging sky for 100 seconds.
7:19:19 PM - Current sun altitude: -26.7846
7:19:19 PM - Sun is low enough, good to observe!
7:19:20 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:19:20 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:19:20 PM - Exposing image C:\Users\Bell\Data\k260127-0014.fit
7:19:20 PM - PWI Status page writing to logtest file
7:19:20 PM - Writing mount apparent RA: 03:19:08.75696478888
7:19:20 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:19:20 PM - Writing mount J2000 RA: 03:03:35.84827955124
7:19:20 PM - Writing mount J2000 Dec: -33:10:19.25188035312
7:19:20 PM - Dome going to scope azimuth: 181.999775086026
7:21:01 PM - Starting image save...
7:21:02 PM - Saved image C:\Users\Bell\Data\k260127-0014.fit
7:21:02 PM - ----------------------------------------
7:21:02 PM - Beginning Frame #5Acquisition
7:21:02 PM - ----------------------------------------
7:21:02 PM - Object from target list used for altcheck in EXP command is FLAT
7:21:02 PM - HasRA and HasDec at beginning of EXP command: False and False
7:21:02 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:21:02 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:21:02 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:21:02 PM - BIAS/FLAT Object Alt: 20
7:21:04 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:21:04 PM - Imaging sky for 100 seconds.
7:21:07 PM - Current sun altitude: -27.1417
7:21:07 PM - Sun is low enough, good to observe!
7:21:07 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:21:07 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:21:07 PM - Exposing image C:\Users\Bell\Data\k260127-0015.fit
7:21:07 PM - PWI Status page writing to logtest file
7:21:07 PM - Writing mount apparent RA: 03:46:11.7336271494
7:21:07 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:21:07 PM - Writing mount J2000 RA: 03:30:40.13819891532
7:21:07 PM - Writing mount J2000 Dec: -33:10:15.83726122956
7:21:07 PM - Dome going to scope azimuth: 181.999775086026
7:22:49 PM - Starting image save...
7:22:50 PM - Saved image C:\Users\Bell\Data\k260127-0015.fit
7:22:50 PM - Changing filter to position 2.
7:22:50 PM - ----------------------------------------
7:22:50 PM - Beginning Frame #6Acquisition
7:22:50 PM - ----------------------------------------
7:22:50 PM - Object from target list used for altcheck in EXP command is FLAT
7:22:50 PM - HasRA and HasDec at beginning of EXP command: False and False
7:22:50 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:22:50 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:22:50 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:22:50 PM - BIAS/FLAT Object Alt: 20
7:22:52 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:22:52 PM - Imaging sky for 40 seconds.
7:22:55 PM - Current sun altitude: -27.4987
7:22:55 PM - Sun is low enough, good to observe!
7:22:55 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:22:55 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:22:55 PM - Exposing image C:\Users\Bell\Data\k260127-0016.fit
7:22:55 PM - PWI Status page writing to logtest file
7:22:55 PM - Writing mount apparent RA: 03:13:06.70779453576
7:22:55 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:22:55 PM - Writing mount J2000 RA: 03:57:36.40200527088
7:22:55 PM - Writing mount J2000 Dec: -33:10:12.42237210744
7:22:55 PM - Dome going to scope azimuth: 181.999775086026
7:23:37 PM - Starting image save...
7:23:38 PM - Saved image C:\Users\Bell\Data\k260127-0016.fit
7:23:38 PM - ----------------------------------------
7:23:38 PM - Beginning Frame #7Acquisition
7:23:38 PM - ----------------------------------------
7:23:38 PM - Object from target list used for altcheck in EXP command is FLAT
7:23:38 PM - HasRA and HasDec at beginning of EXP command: False and False
7:23:38 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:23:38 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:23:38 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:23:38 PM - BIAS/FLAT Object Alt: 20
7:23:40 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:23:40 PM - Imaging sky for 40 seconds.
7:23:43 PM - Current sun altitude: -27.6584
7:23:43 PM - Sun is low enough, good to observe!
7:23:43 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:23:43 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:23:43 PM - Exposing image C:\Users\Bell\Data\k260127-0017.fit
7:23:43 PM - PWI Status page writing to logtest file
7:23:43 PM - Writing mount apparent RA: 03:25:10.01799881508
7:23:43 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:23:43 PM - Writing mount J2000 RA: 03:09:40.28424416244
7:23:43 PM - Writing mount J2000 Dec: -33:10:10.88744363868
7:23:43 PM - Dome going to scope azimuth: 181.999775086026
7:24:24 PM - Starting image save...
7:24:25 PM - Saved image C:\Users\Bell\Data\k260127-0017.fit
7:24:25 PM - ----------------------------------------
7:24:25 PM - Beginning Frame #8Acquisition
7:24:25 PM - ----------------------------------------
7:24:25 PM - Object from target list used for altcheck in EXP command is FLAT
7:24:25 PM - HasRA and HasDec at beginning of EXP command: False and False
7:24:25 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:24:25 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:24:25 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:24:25 PM - BIAS/FLAT Object Alt: 20
7:24:27 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:24:27 PM - Imaging sky for 40 seconds.
7:24:30 PM - Current sun altitude: -27.8151
7:24:30 PM - Sun is low enough, good to observe!
7:24:30 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:24:30 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:24:30 PM - Exposing image C:\Users\Bell\Data\k260127-0018.fit
7:24:30 PM - PWI Status page writing to logtest file
7:24:30 PM - Writing mount apparent RA: 03:36:59.2757718318
7:24:30 PM - Writing mount apparent Dec: -33:05:41.66890543176
7:24:30 PM - Writing mount J2000 RA: 03:21:30.09983178384
7:24:30 PM - Writing mount J2000 Dec: -33:10:09.46022792088
7:24:30 PM - Dome going to scope azimuth: 181.999775099893
7:25:12 PM - Starting image save...
7:25:12 PM - Saved image C:\Users\Bell\Data\k260127-0018.fit
7:25:12 PM - Changing filter to position 3.
7:25:12 PM - ----------------------------------------
7:25:12 PM - Beginning Frame #9Acquisition
7:25:12 PM - ----------------------------------------
7:25:12 PM - Object from target list used for altcheck in EXP command is FLAT
7:25:12 PM - HasRA and HasDec at beginning of EXP command: False and False
7:25:12 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:25:12 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:25:12 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:25:12 PM - BIAS/FLAT Object Alt: 20
7:25:14 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:25:14 PM - Imaging sky for 30 seconds.
7:25:17 PM - Current sun altitude: -27.9718
7:25:17 PM - Sun is low enough, good to observe!
7:25:17 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:25:17 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:25:17 PM - Exposing image C:\Users\Bell\Data\k260127-0019.fit
7:25:17 PM - PWI Status page writing to logtest file
7:25:17 PM - Writing mount apparent RA: 03:48:48.1162500396
7:25:17 PM - Writing mount apparent Dec: -33:05:41.66890543176
7:25:17 PM - Writing mount J2000 RA: 03:33:19.4942269854
7:25:17 PM - Writing mount J2000 Dec: -33:10:07.94953082424
7:25:17 PM - Dome going to scope azimuth: 181.999775099893
7:25:50 PM - Starting image save...
7:25:50 PM - Saved image C:\Users\Bell\Data\k260127-0019.fit
7:25:50 PM - ----------------------------------------
7:25:50 PM - Beginning Frame #10Acquisition
7:25:50 PM - ----------------------------------------
7:25:50 PM - Object from target list used for altcheck in EXP command is FLAT
7:25:50 PM - HasRA and HasDec at beginning of EXP command: False and False
7:25:50 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:25:50 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:25:50 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:25:50 PM - BIAS/FLAT Object Alt: 20
7:25:52 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:25:52 PM - Imaging sky for 30 seconds.
7:25:55 PM - Current sun altitude: -28.0984
7:25:55 PM - Sun is low enough, good to observe!
7:25:55 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:25:55 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:25:55 PM - Exposing image C:\Users\Bell\Data\k260127-0020.fit
7:25:55 PM - PWI Status page writing to logtest file
7:25:55 PM - Writing mount apparent RA: 03:58:20.717898384
7:25:55 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:25:55 PM - Writing mount J2000 RA: 03:42:52.54065180396
7:25:55 PM - Writing mount J2000 Dec: -33:10:06.64569975864
7:25:55 PM - Dome going to scope azimuth: 181.999775086026
7:26:27 PM - Starting image save...
7:26:27 PM - Saved image C:\Users\Bell\Data\k260127-0020.fit
7:26:27 PM - ----------------------------------------
7:26:27 PM - Beginning Frame #11Acquisition
7:26:27 PM - ----------------------------------------
7:26:27 PM - Object from target list used for altcheck in EXP command is FLAT
7:26:27 PM - HasRA and HasDec at beginning of EXP command: False and False
7:26:27 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:26:27 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:26:27 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:26:27 PM - BIAS/FLAT Object Alt: 20
7:26:29 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:26:29 PM - Imaging sky for 30 seconds.
7:26:32 PM - Current sun altitude: -28.2219
7:26:32 PM - Sun is low enough, good to observe!
7:26:32 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:26:32 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:26:32 PM - Exposing image C:\Users\Bell\Data\k260127-0021.fit
7:26:32 PM - PWI Status page writing to logtest file
7:26:32 PM - Writing mount apparent RA: 03:07:39.71916204708
7:26:32 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:26:32 PM - Writing mount J2000 RA: 03:52:11.974269792
7:26:32 PM - Writing mount J2000 Dec: -33:10:05.45006560872
7:26:32 PM - Dome going to scope azimuth: 181.999775086026
7:27:04 PM - Starting image save...
7:27:05 PM - Saved image C:\Users\Bell\Data\k260127-0021.fit
7:27:05 PM - Changing Flat Field Screen light power to 200
7:27:05 PM - From target list, waiting for 2 seconds.
7:27:07 PM - Changing filter to position 4.
7:27:07 PM - ----------------------------------------
7:27:07 PM - Beginning Frame #12Acquisition
7:27:07 PM - ----------------------------------------
7:27:07 PM - Object from target list used for altcheck in EXP command is FLAT
7:27:07 PM - HasRA and HasDec at beginning of EXP command: False and False
7:27:07 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:27:07 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:27:07 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:27:07 PM - BIAS/FLAT Object Alt: 20
7:27:09 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:27:09 PM - Imaging sky for 20 seconds.
7:27:12 PM - Current sun altitude: -28.3527
7:27:12 PM - Sun is low enough, good to observe!
7:27:12 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:27:12 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:27:12 PM - Exposing image C:\Users\Bell\Data\k260127-0022.fit
7:27:12 PM - PWI Status page writing to logtest file
7:27:12 PM - Writing mount apparent RA: 03:17:31.57363690368
7:27:12 PM - Writing mount apparent Dec: -33:05:41.50658108652
7:27:12 PM - Writing mount J2000 RA: 03:02:04.2839972214
7:27:12 PM - Writing mount J2000 Dec: -33:10:04.10086083828
7:27:12 PM - Dome going to scope azimuth: 181.99977507216
7:27:34 PM - Starting image save...
7:27:35 PM - Saved image C:\Users\Bell\Data\k260127-0022.fit
7:27:35 PM - ----------------------------------------
7:27:35 PM - Beginning Frame #13Acquisition
7:27:35 PM - ----------------------------------------
7:27:35 PM - Object from target list used for altcheck in EXP command is FLAT
7:27:35 PM - HasRA and HasDec at beginning of EXP command: False and False
7:27:35 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:27:35 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:27:35 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:27:35 PM - BIAS/FLAT Object Alt: 20
7:27:37 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:27:37 PM - Imaging sky for 20 seconds.
7:27:40 PM - Current sun altitude: -28.4461
7:27:40 PM - Sun is low enough, good to observe!
7:27:40 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:27:40 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:27:40 PM - Exposing image C:\Users\Bell\Data\k260127-0023.fit
7:27:40 PM - PWI Status page writing to logtest file
7:27:40 PM - Writing mount apparent RA: 03:24:33.96554970696
7:27:40 PM - Writing mount apparent Dec: -33:05:41.66890543176
7:27:40 PM - Writing mount J2000 RA: 03:09:07.00006056804
7:27:40 PM - Writing mount J2000 Dec: -33:10:03.35685722052
7:27:40 PM - Dome going to scope azimuth: 181.999775099893
7:28:01 PM - Starting image save...
7:28:02 PM - Saved image C:\Users\Bell\Data\k260127-0023.fit
7:28:02 PM - ----------------------------------------
7:28:02 PM - Beginning Frame #14Acquisition
7:28:02 PM - ----------------------------------------
7:28:02 PM - Object from target list used for altcheck in EXP command is FLAT
7:28:02 PM - HasRA and HasDec at beginning of EXP command: False and False
7:28:02 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:28:02 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:28:02 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:28:02 PM - BIAS/FLAT Object Alt: 20
7:28:04 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:28:04 PM - Imaging sky for 20 seconds.
7:28:07 PM - Current sun altitude: -28.5367
7:28:07 PM - Sun is low enough, good to observe!
7:28:07 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:28:07 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:28:07 PM - Exposing image C:\Users\Bell\Data\k260127-0024.fit
7:28:07 PM - PWI Status page writing to logtest file
7:28:07 PM - Writing mount apparent RA: 03:31:23.56391148528
7:28:07 PM - Writing mount apparent Dec: -33:05:41.66890543176
7:28:07 PM - Writing mount J2000 RA: 03:15:56.91113805528
7:28:07 PM - Writing mount J2000 Dec: -33:10:02.476926048
7:28:07 PM - Dome going to scope azimuth: 181.999775099893
7:28:29 PM - Starting image save...
7:28:29 PM - Saved image C:\Users\Bell\Data\k260127-0024.fit
7:28:29 PM - Changing filter to position 5.
7:28:29 PM - ----------------------------------------
7:28:29 PM - Beginning Frame #15Acquisition
7:28:29 PM - ----------------------------------------
7:28:29 PM - Object from target list used for altcheck in EXP command is FLAT
7:28:29 PM - HasRA and HasDec at beginning of EXP command: False and False
7:28:29 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:28:29 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:28:29 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:28:29 PM - BIAS/FLAT Object Alt: 20
7:28:31 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:28:31 PM - Imaging sky for 20 seconds.
7:28:34 PM - Current sun altitude: -28.6271
7:28:34 PM - Sun is low enough, good to observe!
7:28:34 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:28:34 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:28:34 PM - Exposing image C:\Users\Bell\Data\k260127-0025.fit
7:28:34 PM - PWI Status page writing to logtest file
7:28:34 PM - Writing mount apparent RA: 03:38:12.4133566416
7:28:34 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:28:34 PM - Writing mount J2000 RA: 03:22:46.07136183216
7:28:34 PM - Writing mount J2000 Dec: -33:10:01.51640506884
7:28:34 PM - Dome going to scope azimuth: 181.999775086026
7:28:57 PM - Starting image save...
7:28:57 PM - Saved image C:\Users\Bell\Data\k260127-0025.fit
7:28:57 PM - ----------------------------------------
7:28:57 PM - Beginning Frame #16Acquisition
7:28:57 PM - ----------------------------------------
7:28:57 PM - Object from target list used for altcheck in EXP command is FLAT
7:28:57 PM - HasRA and HasDec at beginning of EXP command: False and False
7:28:57 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:28:57 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:28:57 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:28:57 PM - BIAS/FLAT Object Alt: 20
7:28:59 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:28:59 PM - Imaging sky for 20 seconds.
7:29:02 PM - Current sun altitude: -28.7207
7:29:02 PM - Sun is low enough, good to observe!
7:29:02 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:29:02 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:29:02 PM - Exposing image C:\Users\Bell\Data\k260127-0026.fit
7:29:02 PM - PWI Status page writing to logtest file
7:29:02 PM - Writing mount apparent RA: 03:45:15.33892251168
7:29:02 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:29:02 PM - Writing mount J2000 RA: 03:29:49.3174885632
7:29:02 PM - Writing mount J2000 Dec: -33:10:00.6056744142
7:29:02 PM - Dome going to scope azimuth: 181.999775086026
7:29:24 PM - Starting image save...
7:29:24 PM - Saved image C:\Users\Bell\Data\k260127-0026.fit
7:29:24 PM - ----------------------------------------
7:29:24 PM - Beginning Frame #17Acquisition
7:29:24 PM - ----------------------------------------
7:29:24 PM - Object from target list used for altcheck in EXP command is FLAT
7:29:24 PM - HasRA and HasDec at beginning of EXP command: False and False
7:29:24 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:29:24 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:29:24 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:29:24 PM - BIAS/FLAT Object Alt: 20
7:29:26 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:29:26 PM - Imaging sky for 20 seconds.
7:29:29 PM - Current sun altitude: -28.8108
7:29:29 PM - Sun is low enough, good to observe!
7:29:29 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:29:29 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:29:29 PM - Exposing image C:\Users\Bell\Data\k260127-0027.fit
7:29:29 PM - PWI Status page writing to logtest file
7:29:29 PM - Writing mount apparent RA: 03:52:02.80110708048
7:29:29 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:29:29 PM - Writing mount J2000 RA: 03:36:37.08738219924
7:29:29 PM - Writing mount J2000 Dec: -33:09:59.72719650984
7:29:29 PM - Dome going to scope azimuth: 181.999775086026
7:29:51 PM - Starting image save...
7:29:52 PM - Saved image C:\Users\Bell\Data\k260127-0027.fit
7:29:52 PM - Changing filter to position 6.
7:29:52 PM - ----------------------------------------
7:29:52 PM - Beginning Frame #18Acquisition
7:29:52 PM - ----------------------------------------
7:29:52 PM - Object from target list used for altcheck in EXP command is FLAT
7:29:52 PM - HasRA and HasDec at beginning of EXP command: False and False
7:29:52 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:29:52 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:29:52 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:29:52 PM - BIAS/FLAT Object Alt: 20
7:29:54 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:29:54 PM - Imaging sky for 20 seconds.
7:29:57 PM - Current sun altitude: -28.9014
7:29:57 PM - Sun is low enough, good to observe!
7:29:57 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:29:57 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:29:57 PM - Exposing image C:\Users\Bell\Data\k260127-0028.fit
7:29:57 PM - PWI Status page writing to logtest file
7:29:57 PM - Writing mount apparent RA: 03:58:52.36921140024
7:29:57 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:29:57 PM - Writing mount J2000 RA: 03:43:26.96366600868
7:29:57 PM - Writing mount J2000 Dec: -33:09:58.84314712308
7:29:57 PM - Dome going to scope azimuth: 181.999775086026
7:30:19 PM - Starting image save...
7:30:20 PM - Saved image C:\Users\Bell\Data\k260127-0028.fit
7:30:20 PM - ----------------------------------------
7:30:20 PM - Beginning Frame #19Acquisition
7:30:20 PM - ----------------------------------------
7:30:20 PM - Object from target list used for altcheck in EXP command is FLAT
7:30:20 PM - HasRA and HasDec at beginning of EXP command: False and False
7:30:20 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:30:20 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:30:20 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:30:20 PM - BIAS/FLAT Object Alt: 20
7:30:22 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:30:22 PM - Imaging sky for 20 seconds.
7:30:25 PM - Current sun altitude: -28.995
7:30:25 PM - Sun is low enough, good to observe!
7:30:25 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:30:25 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:30:25 PM - Exposing image C:\Users\Bell\Data\k260127-0029.fit
7:30:25 PM - PWI Status page writing to logtest file
7:30:25 PM - Writing mount apparent RA: 04:05:55.51660883112
7:30:25 PM - Writing mount apparent Dec: -33:05:41.66890543176
7:30:25 PM - Writing mount J2000 RA: 03:50:30.42853036008
7:30:25 PM - Writing mount J2000 Dec: -33:09:58.00986186336
7:30:25 PM - Dome going to scope azimuth: 181.999775099893
7:30:46 PM - Starting image save...
7:30:47 PM - Saved image C:\Users\Bell\Data\k260127-0029.fit
7:30:47 PM - ----------------------------------------
7:30:47 PM - Beginning Frame #20Acquisition
7:30:47 PM - ----------------------------------------
7:30:47 PM - Object from target list used for altcheck in EXP command is FLAT
7:30:47 PM - HasRA and HasDec at beginning of EXP command: False and False
7:30:47 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:30:47 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:30:47 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:30:47 PM - BIAS/FLAT Object Alt: 20
7:30:49 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:30:49 PM - Imaging sky for 20 seconds.
7:30:52 PM - Current sun altitude: -29.0851
7:30:52 PM - Sun is low enough, good to observe!
7:30:52 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:30:52 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:30:52 PM - Exposing image C:\Users\Bell\Data\k260127-0030.fit
7:30:52 PM - PWI Status page writing to logtest file
7:30:52 PM - Writing mount apparent RA: 04:12:42.98268257064
7:30:52 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:30:52 PM - Writing mount J2000 RA: 03:57:18.19867971204
7:30:52 PM - Writing mount J2000 Dec: -33:09:57.04711483104
7:30:52 PM - Dome going to scope azimuth: 181.999775086026
7:31:13 PM - Starting image save...
7:31:14 PM - Saved image C:\Users\Bell\Data\k260127-0030.fit
7:31:14 PM - Changing filter to position 7.
7:31:14 PM - ----------------------------------------
7:31:14 PM - Beginning Frame #21Acquisition
7:31:14 PM - ----------------------------------------
7:31:14 PM - Object from target list used for altcheck in EXP command is FLAT
7:31:14 PM - HasRA and HasDec at beginning of EXP command: False and False
7:31:14 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:31:14 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:31:14 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:31:14 PM - BIAS/FLAT Object Alt: 20
7:31:16 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:31:16 PM - Imaging sky for 20 seconds.
7:31:19 PM - Current sun altitude: -29.1751
7:31:19 PM - Sun is low enough, good to observe!
7:31:19 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:31:19 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:31:19 PM - Exposing image C:\Users\Bell\Data\k260127-0031.fit
7:31:19 PM - PWI Status page writing to logtest file
7:31:19 PM - Writing mount apparent RA: 04:19:29.79796250208
7:31:19 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:31:19 PM - Writing mount J2000 RA: 04:04:05.31668719848
7:31:19 PM - Writing mount J2000 Dec: -33:09:56.16592253352
7:31:19 PM - Dome going to scope azimuth: 181.999775086026
7:31:41 PM - Starting image save...
7:31:42 PM - Saved image C:\Users\Bell\Data\k260127-0031.fit
7:31:42 PM - ----------------------------------------
7:31:42 PM - Beginning Frame #22Acquisition
7:31:42 PM - ----------------------------------------
7:31:42 PM - Object from target list used for altcheck in EXP command is FLAT
7:31:42 PM - HasRA and HasDec at beginning of EXP command: False and False
7:31:42 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:31:42 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:31:42 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:31:42 PM - BIAS/FLAT Object Alt: 20
7:31:44 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:31:44 PM - Imaging sky for 20 seconds.
7:31:47 PM - Current sun altitude: -29.2685
7:31:47 PM - Sun is low enough, good to observe!
7:31:47 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:31:47 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:31:47 PM - Exposing image C:\Users\Bell\Data\k260127-0032.fit
7:31:47 PM - PWI Status page writing to logtest file
7:31:47 PM - Writing mount apparent RA: 04:26:32.01610879176
7:31:47 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:31:47 PM - Writing mount J2000 RA: 04:11:07.84784641704
7:31:47 PM - Writing mount J2000 Dec: -33:09:55.2503025576
7:31:47 PM - Dome going to scope azimuth: 181.999775086026
7:32:08 PM - Starting image save...
7:32:09 PM - Saved image C:\Users\Bell\Data\k260127-0032.fit
7:32:09 PM - ----------------------------------------
7:32:09 PM - Beginning Frame #23Acquisition
7:32:09 PM - ----------------------------------------
7:32:09 PM - Object from target list used for altcheck in EXP command is FLAT
7:32:09 PM - HasRA and HasDec at beginning of EXP command: False and False
7:32:09 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:32:09 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:32:09 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:32:09 PM - BIAS/FLAT Object Alt: 20
7:32:11 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:32:11 PM - Imaging sky for 20 seconds.
7:32:14 PM - Current sun altitude: -29.3584
7:32:14 PM - Sun is low enough, good to observe!
7:32:14 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:32:14 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:32:14 PM - Exposing image C:\Users\Bell\Data\k260127-0033.fit
7:32:14 PM - PWI Status page writing to logtest file
7:32:14 PM - Writing mount apparent RA: 04:33:18.66618295812
7:32:14 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:32:14 PM - Writing mount J2000 RA: 04:17:54.79825796088
7:32:14 PM - Writing mount J2000 Dec: -33:09:54.3674224782
7:32:14 PM - Dome going to scope azimuth: 181.999775086026
7:32:35 PM - Starting image save...
7:32:36 PM - Saved image C:\Users\Bell\Data\k260127-0033.fit
7:32:36 PM - Changing filter to position 8.
7:32:36 PM - ----------------------------------------
7:32:36 PM - Beginning Frame #24Acquisition
7:32:36 PM - ----------------------------------------
7:32:36 PM - Object from target list used for altcheck in EXP command is FLAT
7:32:36 PM - HasRA and HasDec at beginning of EXP command: False and False
7:32:36 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:32:36 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:32:36 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:32:36 PM - BIAS/FLAT Object Alt: 20
7:32:38 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:32:38 PM - Imaging sky for 20 seconds.
7:32:41 PM - Current sun altitude: -29.4487
7:32:41 PM - Sun is low enough, good to observe!
7:32:41 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:32:41 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:32:41 PM - Exposing image C:\Users\Bell\Data\k260127-0034.fit
7:32:41 PM - PWI Status page writing to logtest file
7:32:41 PM - Writing mount apparent RA: 04:40:06.74561987292
7:32:41 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:32:41 PM - Writing mount J2000 RA: 04:24:43.177968072
7:32:41 PM - Writing mount J2000 Dec: -33:09:53.4804355548
7:32:41 PM - Dome going to scope azimuth: 181.999775086026
7:33:04 PM - Starting image save...
7:33:04 PM - Saved image C:\Users\Bell\Data\k260127-0034.fit
7:33:04 PM - ----------------------------------------
7:33:04 PM - Beginning Frame #25Acquisition
7:33:04 PM - ----------------------------------------
7:33:04 PM - Object from target list used for altcheck in EXP command is FLAT
7:33:04 PM - HasRA and HasDec at beginning of EXP command: False and False
7:33:04 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:33:04 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:33:04 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:33:04 PM - BIAS/FLAT Object Alt: 20
7:33:06 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:33:06 PM - Imaging sky for 20 seconds.
7:33:09 PM - Current sun altitude: -29.5421
7:33:09 PM - Sun is low enough, good to observe!
7:33:09 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:33:09 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:33:09 PM - Exposing image C:\Users\Bell\Data\k260127-0035.fit
7:33:09 PM - PWI Status page writing to logtest file
7:33:09 PM - Writing mount apparent RA: 04:47:08.75256904284
7:33:09 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:33:09 PM - Writing mount J2000 RA: 04:31:45.49425744864
7:33:09 PM - Writing mount J2000 Dec: -33:09:52.56212262444
7:33:09 PM - Dome going to scope azimuth: 181.999775086026
7:33:31 PM - Starting image save...
7:33:31 PM - Saved image C:\Users\Bell\Data\k260127-0035.fit
7:33:31 PM - ----------------------------------------
7:33:31 PM - Beginning Frame #26Acquisition
7:33:31 PM - ----------------------------------------
7:33:31 PM - Object from target list used for altcheck in EXP command is FLAT
7:33:31 PM - HasRA and HasDec at beginning of EXP command: False and False
7:33:31 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:33:31 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:33:31 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:33:32 PM - BIAS/FLAT Object Alt: 20
7:33:34 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:33:34 PM - Imaging sky for 20 seconds.
7:33:37 PM - Current sun altitude: -29.633
7:33:37 PM - Sun is low enough, good to observe!
7:33:37 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:33:37 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:33:37 PM - Exposing image C:\Users\Bell\Data\k260127-0036.fit
7:33:37 PM - PWI Status page writing to logtest file
7:33:37 PM - Writing mount apparent RA: 04:54:00.20087238168
7:33:37 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:33:37 PM - Writing mount J2000 RA: 04:38:37.2430038084
7:33:37 PM - Writing mount J2000 Dec: -33:09:51.66575812152
7:33:37 PM - Dome going to scope azimuth: 181.999775086026
7:33:58 PM - Starting image save...
7:33:59 PM - Saved image C:\Users\Bell\Data\k260127-0036.fit
7:33:59 PM - Changing Flat Field Screen light power to 100
7:33:59 PM - From target list, waiting for 2 seconds.
7:34:01 PM - Changing filter to position 9.
7:34:01 PM - ----------------------------------------
7:34:01 PM - Beginning Frame #27Acquisition
7:34:01 PM - ----------------------------------------
7:34:01 PM - Object from target list used for altcheck in EXP command is FLAT
7:34:01 PM - HasRA and HasDec at beginning of EXP command: False and False
7:34:01 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:34:01 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:34:01 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:34:01 PM - BIAS/FLAT Object Alt: 20
7:34:03 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:34:03 PM - Imaging sky for 20 seconds.
7:34:06 PM - Current sun altitude: -29.7302
7:34:06 PM - Sun is low enough, good to observe!
7:34:06 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:34:06 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:34:06 PM - Exposing image C:\Users\Bell\Data\k260127-0037.fit
7:34:06 PM - PWI Status page writing to logtest file
7:34:06 PM - Writing mount apparent RA: 04:01:19.0993552914
7:34:06 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:34:06 PM - Writing mount J2000 RA: 04:45:56.46071303244
7:34:06 PM - Writing mount J2000 Dec: -33:09:50.70847721184
7:34:06 PM - Dome going to scope azimuth: 181.999775086026
7:34:28 PM - Starting image save...
7:34:29 PM - Saved image C:\Users\Bell\Data\k260127-0037.fit
7:34:29 PM - ----------------------------------------
7:34:29 PM - Beginning Frame #28Acquisition
7:34:29 PM - ----------------------------------------
7:34:29 PM - Object from target list used for altcheck in EXP command is FLAT
7:34:29 PM - HasRA and HasDec at beginning of EXP command: False and False
7:34:29 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:34:29 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:34:29 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:34:29 PM - BIAS/FLAT Object Alt: 20
7:34:31 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:34:31 PM - Imaging sky for 20 seconds.
7:34:34 PM - Current sun altitude: -29.8237
7:34:34 PM - Sun is low enough, good to observe!
7:34:34 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:34:34 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:34:34 PM - Exposing image C:\Users\Bell\Data\k260127-0038.fit
7:34:34 PM - PWI Status page writing to logtest file
7:34:34 PM - Writing mount apparent RA: 04:08:22.27968904272
7:34:34 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:34:34 PM - Writing mount J2000 RA: 04:52:59.9476067562
7:34:34 PM - Writing mount J2000 Dec: -33:09:49.78439363988
7:34:34 PM - Dome going to scope azimuth: 181.999775086026
7:34:55 PM - Starting image save...
7:34:56 PM - Saved image C:\Users\Bell\Data\k260127-0038.fit
7:34:56 PM - ----------------------------------------
7:34:56 PM - Beginning Frame #29Acquisition
7:34:56 PM - ----------------------------------------
7:34:56 PM - Object from target list used for altcheck in EXP command is FLAT
7:34:56 PM - HasRA and HasDec at beginning of EXP command: False and False
7:34:56 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
7:34:56 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
7:34:56 PM - Assigning new BIAS/FLAT object alt to objalt variable
7:34:56 PM - BIAS/FLAT Object Alt: 20
7:34:58 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 20 degrees.
7:34:58 PM - Imaging sky for 20 seconds.
7:35:01 PM - Current sun altitude: -29.914
7:35:01 PM - Sun is low enough, good to observe!
7:35:01 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
7:35:01 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
7:35:01 PM - Exposing image C:\Users\Bell\Data\k260127-0039.fit
7:35:01 PM - PWI Status page writing to logtest file
7:35:01 PM - Writing mount apparent RA: 04:15:09.99785180196
7:35:01 PM - Writing mount apparent Dec: -33:05:41.58774325932
7:35:01 PM - Writing mount J2000 RA: 04:59:47.95998129456
7:35:01 PM - Writing mount J2000 Dec: -33:09:48.89306993004
7:35:01 PM - Dome going to scope azimuth: 181.999775086026
7:35:22 PM - Starting image save...
7:35:23 PM - Saved image C:\Users\Bell\Data\k260127-0039.fit
7:35:24 PM - End of FlatFieldList.txt.
7:35:24 PM - ----------------------------------------
7:35:24 PM - Light Frame Acquisition: Startup
7:35:24 PM - ----------------------------------------
7:37:25 PM - Dome opened!
7:37:25 PM - Dome slit output not being read properly...
7:37:25 PM - Flat field outlet turned off
7:37:28 PM - New destination read in target list: C:\Users\Bell\Data\.
7:37:28 PM - New observer read in target list: Michael Carini.
7:37:28 PM - Changing image type to LightFrame
7:37:28 PM - HMSToHours RA from TargetList is 5.15719444444444
7:37:28 PM - Given (unmodded) RA from TargetList is 05h09m25.9s
7:37:28 PM - HasRA value after reading RA line from target list: True
7:37:28 PM - DMSToDegrees Dec from TargetList is 5.69313888888889
7:37:28 PM - Given (unmodded) Dec from TargetList is 
7:37:28 PM - HasDec value after reading Dec line from target list: True
7:37:28 PM - New object read in target list: TXS0506+056.
7:37:28 PM - Changing filter to position 3.
7:37:28 PM - ----------------------------------------
7:37:28 PM - Beginning Frame #0Acquisition
7:37:28 PM - ----------------------------------------
7:37:28 PM - Object from target list used for altcheck in EXP command is TXS0506+056
7:37:28 PM - HasRA and HasDec at beginning of EXP command: True and True
7:37:28 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
7:37:30 PM - Assigning new object alt to objalt variable
7:37:30 PM - Object Alt: 20
7:37:31 PM - objalt < 30.  Running ObjectAltCheck again to determine if object is rising or setting.  Current objalt: 20
7:37:31 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
7:37:33 PM - Assigning new object alt to objalt variable
7:37:33 PM - Object Alt: 56.42393
7:37:33 PM - Object (still) rising.  Waiting 300s.
7:37:48 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
7:37:50 PM - Assigning new object alt to objalt variable
7:37:50 PM - Object Alt: 56.42841
7:37:50 PM - After waiting 300s, new object alt is 56.42841
7:37:50 PM - Object finally above 30 degrees after waiting to rise.
7:37:52 PM - Moon distance to next object: 42.293932038022
7:37:52 PM - Moon is far enough away!
7:37:52 PM - MoonGood = True; good to observe.
7:37:52 PM - Dome azimuth is 181.97 degrees.  Object azimuth is 56.42841 degrees.
7:37:52 PM - Imaging sky for 240 seconds.
7:37:55 PM - Current sun altitude: -30.4953
7:37:55 PM - Sun is low enough, good to observe!
7:37:55 PM - HasRA (during PrepareToImage Sub): TrueHasDec (during PrepareToImage Sub): True
7:37:55 PM - New RA/Dec object slew
7:38:25 PM - Dome going to scope azimuth: 155.379325580462
7:38:26 PM - New RA (hour decimal):5.15719444444444
7:38:26 PM - New Dec (deg decimal):5.69313888888889
7:38:26 PM - Exposing image C:\Users\Bell\Data\k260127-0040.fit
7:38:26 PM - PWI Status page writing to logtest file
7:38:26 PM - Writing mount apparent RA: 05:42:42.1617340026
7:38:26 PM - Writing mount apparent Dec: 05:43:33.536234159796
7:38:26 PM - Writing mount J2000 RA: 05:21:28.51536168648
7:38:26 PM - Writing mount J2000 Dec: 05:41:35.247127873812
7:38:26 PM - Dome going to scope azimuth: 155.380978679221
7:42:31 PM - Starting image save...