5:58:47 PM - ----------------------------------------
5:58:47 PM - Startup Sequence
5:58:47 PM - ----------------------------------------
5:58:47 PM - Starting up...
5:58:47 PM - File prefix for tonight is: k260128-
5:58:47 PM - Running Error Check.
5:58:47 PM - No errors present.
5:58:52 PM - Running Error Check.
5:58:52 PM - No errors present.
5:58:52 PM - Dome is already closed
5:58:52 PM - Running Error Check.
5:58:52 PM - No errors present.
5:58:58 PM - Current sun altitude: -10.7745
5:58:58 PM - Sun is low enough, good to observe!
5:58:58 PM - Running Error Check.
5:58:58 PM - No errors present.
5:58:58 PM - Bug light turned off
5:59:03 PM - Running Error Check.
5:59:03 PM - No errors present.
5:59:04 PM - PWI4 opened
5:59:14 PM - Running Error Check.
5:59:14 PM - No errors present.
6:01:18 PM - Running Error Check.
6:01:18 PM - No errors present.
6:01:28 PM - Dome homed
6:01:28 PM - Running Error Check.
6:01:28 PM - No errors present.
6:01:28 PM - Camera is cooled
6:01:29 PM - ----------------------------------------
6:01:29 PM - Bias Frame Acquisition
6:01:29 PM - ----------------------------------------
6:01:36 PM - New destination read in target list: C:\Users\Bell\Data\.
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - New observer read in target list: Bell Observatory.
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - Changing image type to BiasFrame
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - New object read in target list: BIAS.
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - DMSToDegrees az from TargetList is 182
6:01:36 PM - Given (unmodded) az from TargetList is 182d 0m 0s
6:01:36 PM - Hasaz value after reading az line from target list: True
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - DMSToDegrees alt from TargetList is 20
6:01:36 PM - Given (unmodded) alt from TargetList is 20d 0m 0s
6:01:36 PM - Hasalt value after reading alt line from target list: True
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - Changing filter to position 5.
6:01:36 PM - Running Error Check.
6:01:36 PM - No errors present.
6:01:36 PM - ----------------------------------------
6:01:36 PM - Beginning Frame #0Acquisition
6:01:36 PM - ----------------------------------------
6:01:36 PM - Object from target list used for altcheck in EXP command is BIAS
6:01:36 PM - HasRA and HasDec at beginning of EXP command: False and False
6:01:36 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:01:36 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:01:36 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:01:36 PM - BIAS/FLAT Object Alt: 20
6:01:38 PM - Dome azimuth is 298 degrees.  Object azimuth is 20 degrees.
6:01:38 PM - Imaging sky for 5 seconds.
6:01:38 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:01:38 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:01:38 PM - Exposing image C:\Users\Bell\Data\k260128-0001.fit
6:01:38 PM - PWI Status page writing to logtest file
6:01:38 PM - Writing mount apparent RA: 0:51:35.415655017156
6:01:38 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:01:38 PM - Writing mount J2000 RA: 0:31:30.801724254012
6:01:38 PM - Writing mount J2000 Dec: 04:24:39.31648511922
6:01:38 PM - Dome going to scope azimuth: 231.296508637232
6:01:46 PM - Starting image save...
6:01:50 PM - Saved image C:\Users\Bell\Data\k260128-0001.fit
6:01:50 PM - Running Error Check.
6:01:50 PM - No errors present.
6:01:50 PM - ----------------------------------------
6:01:50 PM - Beginning Frame #1Acquisition
6:01:50 PM - ----------------------------------------
6:01:50 PM - Object from target list used for altcheck in EXP command is BIAS
6:01:50 PM - HasRA and HasDec at beginning of EXP command: False and False
6:01:50 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:01:50 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:01:50 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:01:50 PM - BIAS/FLAT Object Alt: 20
6:01:52 PM - Dome azimuth is 253.37 degrees.  Object azimuth is 20 degrees.
6:01:52 PM - Imaging sky for 5 seconds.
6:01:52 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:01:52 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:01:52 PM - Exposing image C:\Users\Bell\Data\k260128-0002.fit
6:01:52 PM - PWI Status page writing to logtest file
6:01:52 PM - Writing mount apparent RA: 0:55:01.72809064452
6:01:52 PM - Writing mount apparent Dec: 04:33:17.401911324012
6:01:52 PM - Writing mount J2000 RA: 0:34:57.055652136624
6:01:52 PM - Writing mount J2000 Dec: 04:24:39.315036797064
6:01:52 PM - Dome going to scope azimuth: 231.296508871427
6:01:58 PM - Starting image save...
6:01:59 PM - Saved image C:\Users\Bell\Data\k260128-0002.fit
6:01:59 PM - Running Error Check.
6:01:59 PM - No errors present.
6:01:59 PM - ----------------------------------------
6:01:59 PM - Beginning Frame #2Acquisition
6:01:59 PM - ----------------------------------------
6:01:59 PM - Object from target list used for altcheck in EXP command is BIAS
6:01:59 PM - HasRA and HasDec at beginning of EXP command: False and False
6:01:59 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:01:59 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:01:59 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:01:59 PM - BIAS/FLAT Object Alt: 20
6:02:01 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:02:01 PM - Imaging sky for 5 seconds.
6:02:01 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:02:01 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:02:01 PM - Exposing image C:\Users\Bell\Data\k260128-0003.fit
6:02:01 PM - PWI Status page writing to logtest file
6:02:01 PM - Writing mount apparent RA: 0:57:18.968622129864
6:02:01 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:02:01 PM - Writing mount J2000 RA: 0:37:14.25722982852
6:02:01 PM - Writing mount J2000 Dec: 04:24:39.41901740466
6:02:01 PM - Dome going to scope azimuth: 231.296508637232
6:02:07 PM - Starting image save...
6:02:08 PM - Saved image C:\Users\Bell\Data\k260128-0003.fit
6:02:08 PM - Running Error Check.
6:02:08 PM - No errors present.
6:02:08 PM - ----------------------------------------
6:02:08 PM - Beginning Frame #3Acquisition
6:02:08 PM - ----------------------------------------
6:02:08 PM - Object from target list used for altcheck in EXP command is BIAS
6:02:08 PM - HasRA and HasDec at beginning of EXP command: False and False
6:02:08 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:02:08 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:02:08 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:02:08 PM - BIAS/FLAT Object Alt: 20
6:02:10 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:02:10 PM - Imaging sky for 5 seconds.
6:02:10 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:02:10 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:02:10 PM - Exposing image C:\Users\Bell\Data\k260128-0004.fit
6:02:10 PM - PWI Status page writing to logtest file
6:02:10 PM - Writing mount apparent RA: 0:59:37.2863982642
6:02:10 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:02:10 PM - Writing mount J2000 RA: 0:39:32.53576342752
6:02:10 PM - Writing mount J2000 Dec: 04:24:39.460707468144
6:02:10 PM - Dome going to scope azimuth: 231.296508637232
6:02:16 PM - Starting image save...
6:02:17 PM - Saved image C:\Users\Bell\Data\k260128-0004.fit
6:02:17 PM - Running Error Check.
6:02:17 PM - No errors present.
6:02:17 PM - ----------------------------------------
6:02:17 PM - Beginning Frame #4Acquisition
6:02:17 PM - ----------------------------------------
6:02:17 PM - Object from target list used for altcheck in EXP command is BIAS
6:02:17 PM - HasRA and HasDec at beginning of EXP command: False and False
6:02:17 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:02:17 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:02:17 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:02:17 PM - BIAS/FLAT Object Alt: 20
6:02:19 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:02:19 PM - Imaging sky for 5 seconds.
6:02:19 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:02:19 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:02:19 PM - Exposing image C:\Users\Bell\Data\k260128-0005.fit
6:02:19 PM - PWI Status page writing to logtest file
6:02:19 PM - Writing mount apparent RA: 0:01:53.363306342172
6:02:19 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:02:19 PM - Writing mount J2000 RA: 0:41:48.5740627584
6:02:19 PM - Writing mount J2000 Dec: 04:24:39.501951532092
6:02:19 PM - Dome going to scope azimuth: 231.296508637232
6:02:25 PM - Starting image save...
6:02:26 PM - Saved image C:\Users\Bell\Data\k260128-0005.fit
6:02:26 PM - Running Error Check.
6:02:26 PM - No errors present.
6:02:26 PM - ----------------------------------------
6:02:26 PM - Beginning Frame #5Acquisition
6:02:26 PM - ----------------------------------------
6:02:26 PM - Object from target list used for altcheck in EXP command is BIAS
6:02:26 PM - HasRA and HasDec at beginning of EXP command: False and False
6:02:26 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:02:26 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:02:26 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:02:26 PM - BIAS/FLAT Object Alt: 20
6:02:28 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:02:28 PM - Imaging sky for 5 seconds.
6:02:28 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:02:28 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:02:28 PM - Exposing image C:\Users\Bell\Data\k260128-0006.fit
6:02:28 PM - PWI Status page writing to logtest file
6:02:28 PM - Writing mount apparent RA: 0:04:10.79332837788
6:02:28 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:02:28 PM - Writing mount J2000 RA: 0:44:05.965090159992
6:02:28 PM - Writing mount J2000 Dec: 04:24:39.543836645376
6:02:28 PM - Dome going to scope azimuth: 231.296508637232
6:02:34 PM - Starting image save...
6:02:35 PM - Saved image C:\Users\Bell\Data\k260128-0006.fit
6:02:35 PM - Running Error Check.
6:02:35 PM - No errors present.
6:02:35 PM - ----------------------------------------
6:02:35 PM - Beginning Frame #6Acquisition
6:02:35 PM - ----------------------------------------
6:02:35 PM - Object from target list used for altcheck in EXP command is BIAS
6:02:35 PM - HasRA and HasDec at beginning of EXP command: False and False
6:02:35 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:02:35 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:02:35 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:02:35 PM - BIAS/FLAT Object Alt: 20
6:02:37 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:02:37 PM - Imaging sky for 5 seconds.
6:02:37 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:02:37 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:02:37 PM - Exposing image C:\Users\Bell\Data\k260128-0007.fit
6:02:37 PM - PWI Status page writing to logtest file
6:02:37 PM - Writing mount apparent RA: 0:06:26.614258289784
6:02:37 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:02:37 PM - Writing mount J2000 RA: 0:46:21.747480074184
6:02:37 PM - Writing mount J2000 Dec: 04:24:39.58545934242
6:02:37 PM - Dome going to scope azimuth: 231.296508637232
6:02:43 PM - Starting image save...
6:02:44 PM - Saved image C:\Users\Bell\Data\k260128-0007.fit
6:02:44 PM - Running Error Check.
6:02:44 PM - No errors present.
6:02:44 PM - ----------------------------------------
6:02:44 PM - Beginning Frame #7Acquisition
6:02:44 PM - ----------------------------------------
6:02:44 PM - Object from target list used for altcheck in EXP command is BIAS
6:02:44 PM - HasRA and HasDec at beginning of EXP command: False and False
6:02:44 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:02:44 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:02:44 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:02:44 PM - BIAS/FLAT Object Alt: 20
6:02:46 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:02:46 PM - Imaging sky for 5 seconds.
6:02:46 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:02:46 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:02:46 PM - Exposing image C:\Users\Bell\Data\k260128-0008.fit
6:02:46 PM - PWI Status page writing to logtest file
6:02:46 PM - Writing mount apparent RA: 0:08:42.916281932472
6:02:46 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:02:46 PM - Writing mount J2000 RA: 0:48:38.010825293148
6:02:46 PM - Writing mount J2000 Dec: 04:24:39.627457310196
6:02:46 PM - Dome going to scope azimuth: 231.296508637232
6:02:53 PM - Starting image save...
6:02:53 PM - Saved image C:\Users\Bell\Data\k260128-0008.fit
6:02:53 PM - Running Error Check.
6:02:53 PM - No errors present.
6:02:53 PM - ----------------------------------------
6:02:53 PM - Beginning Frame #8Acquisition
6:02:53 PM - ----------------------------------------
6:02:53 PM - Object from target list used for altcheck in EXP command is BIAS
6:02:53 PM - HasRA and HasDec at beginning of EXP command: False and False
6:02:53 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:02:53 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:02:53 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:02:53 PM - BIAS/FLAT Object Alt: 20
6:02:55 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:02:55 PM - Imaging sky for 5 seconds.
6:02:55 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:02:55 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:02:55 PM - Exposing image C:\Users\Bell\Data\k260128-0009.fit
6:02:55 PM - PWI Status page writing to logtest file
6:02:55 PM - Writing mount apparent RA: 0:10:59.970506226132
6:02:55 PM - Writing mount apparent Dec: 04:33:17.4647644002
6:02:55 PM - Writing mount J2000 RA: 0:50:55.026155795316
6:02:55 PM - Writing mount J2000 Dec: 04:24:39.669917164632
6:02:55 PM - Dome going to scope azimuth: 231.296508637232
6:03:02 PM - Starting image save...
6:03:02 PM - Saved image C:\Users\Bell\Data\k260128-0009.fit
6:03:02 PM - Running Error Check.
6:03:02 PM - No errors present.
6:03:02 PM - End of BiasList.txt.
6:03:02 PM - Running Error Check.
6:03:02 PM - No errors present.
6:03:02 PM - ----------------------------------------
6:03:02 PM - Flat Field Frame Acquisition
6:03:02 PM - ----------------------------------------
6:03:19 PM - Running Error Check.
6:03:19 PM - No errors present.
6:03:19 PM - Flat field outlet turned on
6:03:23 PM - Running Error Check.
6:03:23 PM - No errors present.
6:03:23 PM - Running Error Check.
6:03:23 PM - No errors present.
6:03:23 PM - Running Error Check.
6:03:23 PM - No errors present.
6:03:23 PM - Running Error Check.
6:03:23 PM - No errors present.
6:03:23 PM - Running Error Check.
6:03:23 PM - No errors present.
6:03:24 PM - New destination read in target list: C:\Users\Bell\Data\.
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - New observer read in target list: Bell Observatory.
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - Changing image type to FlatField
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - New object read in target list: FLAT.
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - DMSToDegrees az from TargetList is 182
6:03:24 PM - Given (unmodded) az from TargetList is 182d 0m 0s
6:03:24 PM - Hasaz value after reading az line from target list: True
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - DMSToDegrees alt from TargetList is 20
6:03:24 PM - Given (unmodded) alt from TargetList is 20d 0m 0s
6:03:24 PM - Hasalt value after reading alt line from target list: True
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - Changing Flat Field Screen light power to 60
6:03:24 PM - Running Error Check.
6:03:24 PM - No errors present.
6:03:24 PM - From target list, waiting for 2 seconds.
6:03:26 PM - Running Error Check.
6:03:26 PM - No errors present.
6:03:26 PM - Changing filter to position 0.
6:03:26 PM - Running Error Check.
6:03:26 PM - No errors present.
6:03:26 PM - ----------------------------------------
6:03:26 PM - Beginning Frame #0Acquisition
6:03:26 PM - ----------------------------------------
6:03:26 PM - Object from target list used for altcheck in EXP command is FLAT
6:03:26 PM - HasRA and HasDec at beginning of EXP command: False and False
6:03:26 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:03:26 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:03:26 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:03:26 PM - BIAS/FLAT Object Alt: 20
6:03:28 PM - Dome azimuth is 231.29 degrees.  Object azimuth is 20 degrees.
6:03:28 PM - Imaging sky for 20 seconds.
6:03:28 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:03:28 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:03:28 PM - Exposing image C:\Users\Bell\Data\k260128-0010.fit
6:03:28 PM - PWI Status page writing to logtest file
6:03:28 PM - Writing mount apparent RA: 02:17:13.86976331292
6:03:28 PM - Writing mount apparent Dec: -33:05:41.66890543176
6:03:28 PM - Writing mount J2000 RA: 02:00:35.59659722568
6:03:28 PM - Writing mount J2000 Dec: -33:12:19.4449824828
6:03:28 PM - Dome going to scope azimuth: 181.999775099893
6:03:54 PM - Starting image save...
6:03:55 PM - Saved image C:\Users\Bell\Data\k260128-0010.fit
6:03:55 PM - Running Error Check.
6:03:55 PM - No errors present.
6:03:55 PM - ----------------------------------------
6:03:55 PM - Beginning Frame #1Acquisition
6:03:55 PM - ----------------------------------------
6:03:55 PM - Object from target list used for altcheck in EXP command is FLAT
6:03:55 PM - HasRA and HasDec at beginning of EXP command: False and False
6:03:55 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:03:55 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:03:55 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:03:55 PM - BIAS/FLAT Object Alt: 20
6:03:57 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:03:57 PM - Imaging sky for 20 seconds.
6:03:57 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:03:57 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:03:57 PM - Exposing image C:\Users\Bell\Data\k260128-0011.fit
6:03:57 PM - PWI Status page writing to logtest file
6:03:57 PM - Writing mount apparent RA: 02:24:26.4089899764
6:03:57 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:03:57 PM - Writing mount J2000 RA: 02:07:48.65054370708
6:03:57 PM - Writing mount J2000 Dec: -33:12:18.6823767744
6:03:57 PM - Dome going to scope azimuth: 181.999775086026
6:04:18 PM - Starting image save...
6:04:19 PM - Saved image C:\Users\Bell\Data\k260128-0011.fit
6:04:19 PM - Running Error Check.
6:04:19 PM - No errors present.
6:04:19 PM - ----------------------------------------
6:04:19 PM - Beginning Frame #2Acquisition
6:04:19 PM - ----------------------------------------
6:04:19 PM - Object from target list used for altcheck in EXP command is FLAT
6:04:19 PM - HasRA and HasDec at beginning of EXP command: False and False
6:04:19 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:04:19 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:04:19 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:04:19 PM - BIAS/FLAT Object Alt: 20
6:04:21 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:04:21 PM - Imaging sky for 20 seconds.
6:04:21 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:04:21 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:04:21 PM - Exposing image C:\Users\Bell\Data\k260128-0012.fit
6:04:21 PM - PWI Status page writing to logtest file
6:04:21 PM - Writing mount apparent RA: 02:30:29.04957783864
6:04:21 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:04:21 PM - Writing mount J2000 RA: 02:13:51.72210320052
6:04:21 PM - Writing mount J2000 Dec: -33:12:18.10968900192
6:04:21 PM - Dome going to scope azimuth: 181.999775086026
6:04:42 PM - Starting image save...
6:04:43 PM - Saved image C:\Users\Bell\Data\k260128-0012.fit
6:04:43 PM - Running Error Check.
6:04:43 PM - No errors present.
6:04:43 PM - Changing filter to position 1.
6:04:43 PM - Running Error Check.
6:04:43 PM - No errors present.
6:04:43 PM - ----------------------------------------
6:04:43 PM - Beginning Frame #3Acquisition
6:04:43 PM - ----------------------------------------
6:04:43 PM - Object from target list used for altcheck in EXP command is FLAT
6:04:43 PM - HasRA and HasDec at beginning of EXP command: False and False
6:04:43 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:04:43 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:04:43 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:04:43 PM - BIAS/FLAT Object Alt: 20
6:04:45 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:04:45 PM - Imaging sky for 100 seconds.
6:04:45 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:04:45 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:04:45 PM - Exposing image C:\Users\Bell\Data\k260128-0013.fit
6:04:45 PM - PWI Status page writing to logtest file
6:04:45 PM - Writing mount apparent RA: 02:36:30.68198685936
6:04:45 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:04:45 PM - Writing mount J2000 RA: 02:19:53.78362864176
6:04:45 PM - Writing mount J2000 Dec: -33:12:17.53735878612
6:04:45 PM - Dome going to scope azimuth: 181.999775086026
6:06:27 PM - Starting image save...
6:06:28 PM - Saved image C:\Users\Bell\Data\k260128-0013.fit
6:06:28 PM - Running Error Check.
6:06:28 PM - No errors present.
6:06:28 PM - ----------------------------------------
6:06:28 PM - Beginning Frame #4Acquisition
6:06:28 PM - ----------------------------------------
6:06:28 PM - Object from target list used for altcheck in EXP command is FLAT
6:06:28 PM - HasRA and HasDec at beginning of EXP command: False and False
6:06:28 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:06:28 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:06:28 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:06:28 PM - BIAS/FLAT Object Alt: 20
6:06:30 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:06:30 PM - Imaging sky for 100 seconds.
6:06:30 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:06:30 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:06:30 PM - Exposing image C:\Users\Bell\Data\k260128-0014.fit
6:06:30 PM - PWI Status page writing to logtest file
6:06:30 PM - Writing mount apparent RA: 02:02:57.19900616736
6:06:30 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:06:30 PM - Writing mount J2000 RA: 02:46:22.17543708252
6:06:30 PM - Writing mount J2000 Dec: -33:12:15.0119657316
6:06:30 PM - Dome going to scope azimuth: 181.999775086026
6:08:12 PM - Starting image save...
6:08:13 PM - Saved image C:\Users\Bell\Data\k260128-0014.fit
6:08:13 PM - Running Error Check.
6:08:13 PM - No errors present.
6:08:13 PM - ----------------------------------------
6:08:13 PM - Beginning Frame #5Acquisition
6:08:13 PM - ----------------------------------------
6:08:13 PM - Object from target list used for altcheck in EXP command is FLAT
6:08:13 PM - HasRA and HasDec at beginning of EXP command: False and False
6:08:13 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:08:13 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:08:13 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:08:13 PM - BIAS/FLAT Object Alt: 20
6:08:15 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:08:15 PM - Imaging sky for 100 seconds.
6:08:15 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:08:15 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:08:15 PM - Exposing image C:\Users\Bell\Data\k260128-0015.fit
6:08:15 PM - PWI Status page writing to logtest file
6:08:15 PM - Writing mount apparent RA: 02:29:14.37554529672
6:08:15 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:08:15 PM - Writing mount J2000 RA: 02:12:41.20307503488
6:08:15 PM - Writing mount J2000 Dec: -33:12:12.4781036202
6:08:15 PM - Dome going to scope azimuth: 181.999775086026
6:09:56 PM - Starting image save...
6:09:58 PM - Saved image C:\Users\Bell\Data\k260128-0015.fit
6:09:58 PM - Running Error Check.
6:09:58 PM - No errors present.
6:09:58 PM - Changing filter to position 2.
6:09:58 PM - Running Error Check.
6:09:58 PM - No errors present.
6:09:58 PM - ----------------------------------------
6:09:58 PM - Beginning Frame #6Acquisition
6:09:58 PM - ----------------------------------------
6:09:58 PM - Object from target list used for altcheck in EXP command is FLAT
6:09:58 PM - HasRA and HasDec at beginning of EXP command: False and False
6:09:58 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:09:58 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:09:58 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:09:58 PM - BIAS/FLAT Object Alt: 20
6:10:00 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:10:00 PM - Imaging sky for 40 seconds.
6:10:00 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:10:00 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:10:00 PM - Exposing image C:\Users\Bell\Data\k260128-0016.fit
6:10:00 PM - PWI Status page writing to logtest file
6:10:00 PM - Writing mount apparent RA: 02:55:28.61892551928
6:10:00 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:10:00 PM - Writing mount J2000 RA: 02:38:57.28142296608
6:10:00 PM - Writing mount J2000 Dec: -33:12:09.9258989832
6:10:00 PM - Dome going to scope azimuth: 181.999775086026
6:10:42 PM - Starting image save...
6:10:43 PM - Saved image C:\Users\Bell\Data\k260128-0016.fit
6:10:43 PM - Running Error Check.
6:10:43 PM - No errors present.
6:10:43 PM - ----------------------------------------
6:10:43 PM - Beginning Frame #7Acquisition
6:10:43 PM - ----------------------------------------
6:10:43 PM - Object from target list used for altcheck in EXP command is FLAT
6:10:43 PM - HasRA and HasDec at beginning of EXP command: False and False
6:10:43 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:10:43 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:10:43 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:10:43 PM - BIAS/FLAT Object Alt: 20
6:10:45 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:10:45 PM - Imaging sky for 40 seconds.
6:10:45 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:10:45 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:10:45 PM - Exposing image C:\Users\Bell\Data\k260128-0017.fit
6:10:45 PM - PWI Status page writing to logtest file
6:10:45 PM - Writing mount apparent RA: 02:06:46.177071615
6:10:45 PM - Writing mount apparent Dec: -33:05:41.50658108652
6:10:45 PM - Writing mount J2000 RA: 02:50:15.62522533404
6:10:45 PM - Writing mount J2000 Dec: -33:12:08.73921430728
6:10:45 PM - Dome going to scope azimuth: 181.99977507216
6:11:26 PM - Starting image save...
6:11:27 PM - Saved image C:\Users\Bell\Data\k260128-0017.fit
6:11:27 PM - Running Error Check.
6:11:27 PM - No errors present.
6:11:27 PM - ----------------------------------------
6:11:27 PM - Beginning Frame #8Acquisition
6:11:27 PM - ----------------------------------------
6:11:27 PM - Object from target list used for altcheck in EXP command is FLAT
6:11:27 PM - HasRA and HasDec at beginning of EXP command: False and False
6:11:27 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:11:27 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:11:27 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:11:27 PM - BIAS/FLAT Object Alt: 20
6:11:29 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:11:29 PM - Imaging sky for 40 seconds.
6:11:29 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:11:29 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:11:29 PM - Exposing image C:\Users\Bell\Data\k260128-0018.fit
6:11:29 PM - PWI Status page writing to logtest file
6:11:29 PM - Writing mount apparent RA: 02:17:49.48792834416
6:11:29 PM - Writing mount apparent Dec: -33:05:41.50658108652
6:11:29 PM - Writing mount J2000 RA: 02:01:19.70310041184
6:11:29 PM - Writing mount J2000 Dec: -33:12:07.6528376586
6:11:29 PM - Dome going to scope azimuth: 181.99977507216
6:12:10 PM - Starting image save...
6:12:11 PM - Saved image C:\Users\Bell\Data\k260128-0018.fit
6:12:11 PM - Running Error Check.
6:12:11 PM - No errors present.
6:12:11 PM - Changing filter to position 3.
6:12:11 PM - Running Error Check.
6:12:11 PM - No errors present.
6:12:11 PM - ----------------------------------------
6:12:11 PM - Beginning Frame #9Acquisition
6:12:11 PM - ----------------------------------------
6:12:11 PM - Object from target list used for altcheck in EXP command is FLAT
6:12:11 PM - HasRA and HasDec at beginning of EXP command: False and False
6:12:11 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:12:11 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:12:11 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:12:11 PM - BIAS/FLAT Object Alt: 20
6:12:13 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:12:13 PM - Imaging sky for 30 seconds.
6:12:13 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:12:13 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:12:13 PM - Exposing image C:\Users\Bell\Data\k260128-0019.fit
6:12:13 PM - PWI Status page writing to logtest file
6:12:13 PM - Writing mount apparent RA: 02:28:53.15349124812
6:12:13 PM - Writing mount apparent Dec: -33:05:41.66890543176
6:12:13 PM - Writing mount J2000 RA: 02:12:24.13418560884
6:12:13 PM - Writing mount J2000 Dec: -33:12:06.72414991704
6:12:13 PM - Dome going to scope azimuth: 181.999775099893
6:12:45 PM - Starting image save...
6:12:46 PM - Saved image C:\Users\Bell\Data\k260128-0019.fit
6:12:46 PM - Running Error Check.
6:12:46 PM - No errors present.
6:12:46 PM - ----------------------------------------
6:12:46 PM - Beginning Frame #10Acquisition
6:12:46 PM - ----------------------------------------
6:12:46 PM - Object from target list used for altcheck in EXP command is FLAT
6:12:46 PM - HasRA and HasDec at beginning of EXP command: False and False
6:12:46 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:12:46 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:12:46 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:12:46 PM - BIAS/FLAT Object Alt: 20
6:12:48 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:12:48 PM - Imaging sky for 30 seconds.
6:12:48 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:12:48 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:12:48 PM - Exposing image C:\Users\Bell\Data\k260128-0020.fit
6:12:48 PM - PWI Status page writing to logtest file
6:12:48 PM - Writing mount apparent RA: 02:37:41.80495792152
6:12:48 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:12:48 PM - Writing mount J2000 RA: 02:21:13.39330257108
6:12:48 PM - Writing mount J2000 Dec: -33:12:05.77105596684
6:12:48 PM - Dome going to scope azimuth: 181.999775086026
6:13:20 PM - Starting image save...
6:13:20 PM - Saved image C:\Users\Bell\Data\k260128-0020.fit
6:13:20 PM - Running Error Check.
6:13:20 PM - No errors present.
6:13:20 PM - ----------------------------------------
6:13:20 PM - Beginning Frame #11Acquisition
6:13:20 PM - ----------------------------------------
6:13:20 PM - Object from target list used for altcheck in EXP command is FLAT
6:13:20 PM - HasRA and HasDec at beginning of EXP command: False and False
6:13:20 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:13:20 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:13:20 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:13:20 PM - BIAS/FLAT Object Alt: 20
6:13:22 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:13:22 PM - Imaging sky for 30 seconds.
6:13:22 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:13:22 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:13:22 PM - Exposing image C:\Users\Bell\Data\k260128-0021.fit
6:13:22 PM - PWI Status page writing to logtest file
6:13:22 PM - Writing mount apparent RA: 02:46:15.32259146172
6:13:22 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:13:22 PM - Writing mount J2000 RA: 02:29:47.49997751376
6:13:22 PM - Writing mount J2000 Dec: -33:12:04.92163501608
6:13:22 PM - Dome going to scope azimuth: 181.999775086026
6:13:54 PM - Starting image save...
6:13:54 PM - Saved image C:\Users\Bell\Data\k260128-0021.fit
6:13:54 PM - Running Error Check.
6:13:54 PM - No errors present.
6:13:54 PM - Changing Flat Field Screen light power to 200
6:13:54 PM - Running Error Check.
6:13:54 PM - No errors present.
6:13:54 PM - From target list, waiting for 2 seconds.
6:13:56 PM - Running Error Check.
6:13:56 PM - No errors present.
6:13:56 PM - Changing filter to position 4.
6:13:56 PM - Running Error Check.
6:13:56 PM - No errors present.
6:13:56 PM - ----------------------------------------
6:13:56 PM - Beginning Frame #12Acquisition
6:13:56 PM - ----------------------------------------
6:13:56 PM - Object from target list used for altcheck in EXP command is FLAT
6:13:56 PM - HasRA and HasDec at beginning of EXP command: False and False
6:13:56 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:13:56 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:13:56 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:13:56 PM - BIAS/FLAT Object Alt: 20
6:13:58 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:13:58 PM - Imaging sky for 20 seconds.
6:13:58 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:13:58 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:13:58 PM - Exposing image C:\Users\Bell\Data\k260128-0022.fit
6:13:58 PM - PWI Status page writing to logtest file
6:13:58 PM - Writing mount apparent RA: 02:55:19.38755890992
6:13:58 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:13:58 PM - Writing mount J2000 RA: 02:38:52.18751834484
6:13:58 PM - Writing mount J2000 Dec: -33:12:04.01906249424
6:13:58 PM - Dome going to scope azimuth: 181.999775086026
6:14:21 PM - Starting image save...
6:14:22 PM - Saved image C:\Users\Bell\Data\k260128-0022.fit
6:14:22 PM - Running Error Check.
6:14:22 PM - No errors present.
6:14:22 PM - ----------------------------------------
6:14:22 PM - Beginning Frame #13Acquisition
6:14:22 PM - ----------------------------------------
6:14:22 PM - Object from target list used for altcheck in EXP command is FLAT
6:14:22 PM - HasRA and HasDec at beginning of EXP command: False and False
6:14:22 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:14:22 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:14:22 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:14:22 PM - BIAS/FLAT Object Alt: 20
6:14:24 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:14:24 PM - Imaging sky for 20 seconds.
6:14:24 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:14:24 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:14:24 PM - Exposing image C:\Users\Bell\Data\k260128-0023.fit
6:14:24 PM - PWI Status page writing to logtest file
6:14:24 PM - Writing mount apparent RA: 02:01:39.8364817602
6:14:24 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:14:24 PM - Writing mount J2000 RA: 02:45:13.07086469712
6:14:24 PM - Writing mount J2000 Dec: -33:12:03.3863197608
6:14:24 PM - Dome going to scope azimuth: 181.999775086026
6:14:45 PM - Starting image save...
6:14:46 PM - Saved image C:\Users\Bell\Data\k260128-0023.fit
6:14:46 PM - Running Error Check.
6:14:46 PM - No errors present.
6:14:46 PM - ----------------------------------------
6:14:46 PM - Beginning Frame #14Acquisition
6:14:46 PM - ----------------------------------------
6:14:46 PM - Object from target list used for altcheck in EXP command is FLAT
6:14:46 PM - HasRA and HasDec at beginning of EXP command: False and False
6:14:46 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:14:46 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:14:46 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:14:46 PM - BIAS/FLAT Object Alt: 20
6:14:48 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:14:48 PM - Imaging sky for 20 seconds.
6:14:48 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:14:48 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:14:48 PM - Exposing image C:\Users\Bell\Data\k260128-0024.fit
6:14:48 PM - PWI Status page writing to logtest file
6:14:48 PM - Writing mount apparent RA: 02:07:43.5596818026
6:14:48 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:14:48 PM - Writing mount J2000 RA: 02:51:17.20867693428
6:14:48 PM - Writing mount J2000 Dec: -33:12:02.78016551028
6:14:48 PM - Dome going to scope azimuth: 181.999775086026
6:15:09 PM - Starting image save...
6:15:11 PM - Saved image C:\Users\Bell\Data\k260128-0024.fit
6:15:11 PM - Running Error Check.
6:15:11 PM - No errors present.
6:15:11 PM - Changing filter to position 5.
6:15:11 PM - Running Error Check.
6:15:11 PM - No errors present.
6:15:11 PM - ----------------------------------------
6:15:11 PM - Beginning Frame #15Acquisition
6:15:11 PM - ----------------------------------------
6:15:11 PM - Object from target list used for altcheck in EXP command is FLAT
6:15:11 PM - HasRA and HasDec at beginning of EXP command: False and False
6:15:11 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:15:11 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:15:11 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:15:11 PM - BIAS/FLAT Object Alt: 20
6:15:13 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:15:13 PM - Imaging sky for 20 seconds.
6:15:13 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:15:13 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:15:13 PM - Exposing image C:\Users\Bell\Data\k260128-0025.fit
6:15:13 PM - PWI Status page writing to logtest file
6:15:13 PM - Writing mount apparent RA: 02:13:57.45060115464
6:15:13 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:15:13 PM - Writing mount J2000 RA: 02:57:31.52507124132
6:15:13 PM - Writing mount J2000 Dec: -33:12:02.15581642488
6:15:13 PM - Dome going to scope azimuth: 181.999775086026
6:15:35 PM - Starting image save...
6:15:36 PM - Saved image C:\Users\Bell\Data\k260128-0025.fit
6:15:36 PM - Running Error Check.
6:15:36 PM - No errors present.
6:15:36 PM - ----------------------------------------
6:15:36 PM - Beginning Frame #16Acquisition
6:15:36 PM - ----------------------------------------
6:15:36 PM - Object from target list used for altcheck in EXP command is FLAT
6:15:36 PM - HasRA and HasDec at beginning of EXP command: False and False
6:15:36 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:15:36 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:15:36 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:15:36 PM - BIAS/FLAT Object Alt: 20
6:15:38 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:15:38 PM - Imaging sky for 20 seconds.
6:15:38 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:15:38 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:15:38 PM - Exposing image C:\Users\Bell\Data\k260128-0026.fit
6:15:38 PM - PWI Status page writing to logtest file
6:15:38 PM - Writing mount apparent RA: 02:20:13.5560202486
6:15:38 PM - Writing mount apparent Dec: -33:05:41.50658108652
6:15:38 PM - Writing mount J2000 RA: 02:03:48.0575458548
6:15:38 PM - Writing mount J2000 Dec: -33:12:01.44533631312
6:15:38 PM - Dome going to scope azimuth: 181.99977507216
6:15:59 PM - Starting image save...
6:16:00 PM - Saved image C:\Users\Bell\Data\k260128-0026.fit
6:16:00 PM - Running Error Check.
6:16:00 PM - No errors present.
6:16:00 PM - ----------------------------------------
6:16:00 PM - Beginning Frame #17Acquisition
6:16:00 PM - ----------------------------------------
6:16:00 PM - Object from target list used for altcheck in EXP command is FLAT
6:16:00 PM - HasRA and HasDec at beginning of EXP command: False and False
6:16:00 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:16:00 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:16:00 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:16:00 PM - BIAS/FLAT Object Alt: 20
6:16:02 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:16:02 PM - Imaging sky for 20 seconds.
6:16:02 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:16:02 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:16:02 PM - Exposing image C:\Users\Bell\Data\k260128-0027.fit
6:16:02 PM - PWI Status page writing to logtest file
6:16:02 PM - Writing mount apparent RA: 02:26:16.01177930592
6:16:02 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:16:02 PM - Writing mount J2000 RA: 02:09:50.92453363788
6:16:02 PM - Writing mount J2000 Dec: -33:12:00.91879937964
6:16:02 PM - Dome going to scope azimuth: 181.999775086026
6:16:23 PM - Starting image save...
6:16:24 PM - Saved image C:\Users\Bell\Data\k260128-0027.fit
6:16:24 PM - Running Error Check.
6:16:24 PM - No errors present.
6:16:24 PM - Changing filter to position 6.
6:16:24 PM - Running Error Check.
6:16:24 PM - No errors present.
6:16:24 PM - ----------------------------------------
6:16:24 PM - Beginning Frame #18Acquisition
6:16:24 PM - ----------------------------------------
6:16:24 PM - Object from target list used for altcheck in EXP command is FLAT
6:16:24 PM - HasRA and HasDec at beginning of EXP command: False and False
6:16:24 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:16:24 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:16:24 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:16:24 PM - BIAS/FLAT Object Alt: 20
6:16:26 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:16:26 PM - Imaging sky for 20 seconds.
6:16:26 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:16:26 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:16:26 PM - Exposing image C:\Users\Bell\Data\k260128-0028.fit
6:16:26 PM - PWI Status page writing to logtest file
6:16:26 PM - Writing mount apparent RA: 02:32:19.71985059384
6:16:26 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:16:26 PM - Writing mount J2000 RA: 02:15:55.04435922672
6:16:26 PM - Writing mount J2000 Dec: -33:12:00.30781487232
6:16:26 PM - Dome going to scope azimuth: 181.999775086026
6:16:48 PM - Starting image save...
6:16:49 PM - Saved image C:\Users\Bell\Data\k260128-0028.fit
6:16:49 PM - Running Error Check.
6:16:49 PM - No errors present.
6:16:49 PM - ----------------------------------------
6:16:49 PM - Beginning Frame #19Acquisition
6:16:49 PM - ----------------------------------------
6:16:49 PM - Object from target list used for altcheck in EXP command is FLAT
6:16:49 PM - HasRA and HasDec at beginning of EXP command: False and False
6:16:49 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:16:49 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:16:49 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:16:49 PM - BIAS/FLAT Object Alt: 20
6:16:51 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:16:51 PM - Imaging sky for 20 seconds.
6:16:51 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:16:51 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:16:51 PM - Exposing image C:\Users\Bell\Data\k260128-0029.fit
6:16:51 PM - PWI Status page writing to logtest file
6:16:51 PM - Writing mount apparent RA: 02:38:37.28100075
6:16:51 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:16:51 PM - Writing mount J2000 RA: 02:22:13.03220292168
6:16:51 PM - Writing mount J2000 Dec: -33:11:59.6722984836
6:16:51 PM - Dome going to scope azimuth: 181.999775086026
6:17:13 PM - Starting image save...
6:17:13 PM - Saved image C:\Users\Bell\Data\k260128-0029.fit
6:17:13 PM - Running Error Check.
6:17:13 PM - No errors present.
6:17:13 PM - ----------------------------------------
6:17:13 PM - Beginning Frame #20Acquisition
6:17:13 PM - ----------------------------------------
6:17:13 PM - Object from target list used for altcheck in EXP command is FLAT
6:17:13 PM - HasRA and HasDec at beginning of EXP command: False and False
6:17:13 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:17:13 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:17:13 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:17:13 PM - BIAS/FLAT Object Alt: 20
6:17:15 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:17:15 PM - Imaging sky for 20 seconds.
6:17:15 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:17:15 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:17:15 PM - Exposing image C:\Users\Bell\Data\k260128-0030.fit
6:17:15 PM - PWI Status page writing to logtest file
6:17:15 PM - Writing mount apparent RA: 02:44:40.34277254292
6:17:15 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:17:15 PM - Writing mount J2000 RA: 02:28:16.5035660808
6:17:15 PM - Writing mount J2000 Dec: -33:11:59.05997865816
6:17:15 PM - Dome going to scope azimuth: 181.999775086026
6:17:37 PM - Starting image save...
6:17:37 PM - Saved image C:\Users\Bell\Data\k260128-0030.fit
6:17:37 PM - Running Error Check.
6:17:37 PM - No errors present.
6:17:37 PM - Changing filter to position 7.
6:17:37 PM - Running Error Check.
6:17:37 PM - No errors present.
6:17:37 PM - ----------------------------------------
6:17:37 PM - Beginning Frame #21Acquisition
6:17:37 PM - ----------------------------------------
6:17:37 PM - Object from target list used for altcheck in EXP command is FLAT
6:17:37 PM - HasRA and HasDec at beginning of EXP command: False and False
6:17:37 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:17:37 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:17:37 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:17:37 PM - BIAS/FLAT Object Alt: 20
6:17:39 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:17:39 PM - Imaging sky for 20 seconds.
6:17:39 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:17:39 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:17:39 PM - Exposing image C:\Users\Bell\Data\k260128-0031.fit
6:17:39 PM - PWI Status page writing to logtest file
6:17:39 PM - Writing mount apparent RA: 02:50:42.8175494736
6:17:39 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:17:39 PM - Writing mount J2000 RA: 02:34:19.386570612
6:17:39 PM - Writing mount J2000 Dec: -33:11:58.4474682912
6:17:39 PM - Dome going to scope azimuth: 181.999775086026
6:18:02 PM - Starting image save...
6:18:02 PM - Saved image C:\Users\Bell\Data\k260128-0031.fit
6:18:02 PM - Running Error Check.
6:18:02 PM - No errors present.
6:18:02 PM - ----------------------------------------
6:18:02 PM - Beginning Frame #22Acquisition
6:18:02 PM - ----------------------------------------
6:18:02 PM - Object from target list used for altcheck in EXP command is FLAT
6:18:02 PM - HasRA and HasDec at beginning of EXP command: False and False
6:18:02 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:18:02 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:18:02 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:18:02 PM - BIAS/FLAT Object Alt: 20
6:18:04 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:18:04 PM - Imaging sky for 20 seconds.
6:18:04 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:18:04 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:18:04 PM - Exposing image C:\Users\Bell\Data\k260128-0032.fit
6:18:04 PM - PWI Status page writing to logtest file
6:18:04 PM - Writing mount apparent RA: 02:56:59.5659840612
6:18:04 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:18:04 PM - Writing mount J2000 RA: 02:40:36.5585638476
6:18:04 PM - Writing mount J2000 Dec: -33:11:57.80959014768
6:18:04 PM - Dome going to scope azimuth: 181.999775086026
6:18:26 PM - Starting image save...
6:18:27 PM - Saved image C:\Users\Bell\Data\k260128-0032.fit
6:18:27 PM - Running Error Check.
6:18:27 PM - No errors present.
6:18:27 PM - ----------------------------------------
6:18:27 PM - Beginning Frame #23Acquisition
6:18:27 PM - ----------------------------------------
6:18:27 PM - Object from target list used for altcheck in EXP command is FLAT
6:18:27 PM - HasRA and HasDec at beginning of EXP command: False and False
6:18:27 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:18:27 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:18:27 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:18:27 PM - BIAS/FLAT Object Alt: 20
6:18:29 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:18:29 PM - Imaging sky for 20 seconds.
6:18:29 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:18:29 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:18:29 PM - Exposing image C:\Users\Bell\Data\k260128-0033.fit
6:18:29 PM - PWI Status page writing to logtest file
6:18:29 PM - Writing mount apparent RA: 02:03:02.52245986488
6:18:29 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:18:29 PM - Writing mount J2000 RA: 02:46:39.92237391288
6:18:29 PM - Writing mount J2000 Dec: -33:11:57.19386211224
6:18:29 PM - Dome going to scope azimuth: 181.999775086026
6:18:50 PM - Starting image save...
6:18:51 PM - Saved image C:\Users\Bell\Data\k260128-0033.fit
6:18:51 PM - Running Error Check.
6:18:51 PM - No errors present.
6:18:51 PM - Changing filter to position 8.
6:18:51 PM - Running Error Check.
6:18:51 PM - No errors present.
6:18:51 PM - ----------------------------------------
6:18:51 PM - Beginning Frame #24Acquisition
6:18:51 PM - ----------------------------------------
6:18:51 PM - Object from target list used for altcheck in EXP command is FLAT
6:18:51 PM - HasRA and HasDec at beginning of EXP command: False and False
6:18:51 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:18:51 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:18:51 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:18:51 PM - BIAS/FLAT Object Alt: 20
6:18:53 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:18:53 PM - Imaging sky for 20 seconds.
6:18:53 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:18:53 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:18:53 PM - Exposing image C:\Users\Bell\Data\k260128-0034.fit
6:18:53 PM - PWI Status page writing to logtest file
6:18:53 PM - Writing mount apparent RA: 02:09:07.05777033384
6:18:53 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:18:53 PM - Writing mount J2000 RA: 02:52:44.8660792146
6:18:53 PM - Writing mount J2000 Dec: -33:11:56.57427109788
6:18:53 PM - Dome going to scope azimuth: 181.999775086026
6:19:15 PM - Starting image save...
6:19:16 PM - Saved image C:\Users\Bell\Data\k260128-0034.fit
6:19:16 PM - Running Error Check.
6:19:16 PM - No errors present.
6:19:16 PM - ----------------------------------------
6:19:16 PM - Beginning Frame #25Acquisition
6:19:16 PM - ----------------------------------------
6:19:16 PM - Object from target list used for altcheck in EXP command is FLAT
6:19:16 PM - HasRA and HasDec at beginning of EXP command: False and False
6:19:16 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:19:16 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:19:16 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:19:16 PM - BIAS/FLAT Object Alt: 20
6:19:18 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:19:18 PM - Imaging sky for 20 seconds.
6:19:18 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:19:18 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:19:18 PM - Exposing image C:\Users\Bell\Data\k260128-0035.fit
6:19:18 PM - PWI Status page writing to logtest file
6:19:18 PM - Writing mount apparent RA: 02:15:23.44553590824
6:19:18 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:19:18 PM - Writing mount J2000 RA: 02:59:01.67476877808
6:19:18 PM - Writing mount J2000 Dec: -33:11:55.933291131
6:19:18 PM - Dome going to scope azimuth: 181.999775086026
6:19:39 PM - Starting image save...
6:19:40 PM - Saved image C:\Users\Bell\Data\k260128-0035.fit
6:19:40 PM - Running Error Check.
6:19:40 PM - No errors present.
6:19:40 PM - ----------------------------------------
6:19:40 PM - Beginning Frame #26Acquisition
6:19:40 PM - ----------------------------------------
6:19:40 PM - Object from target list used for altcheck in EXP command is FLAT
6:19:40 PM - HasRA and HasDec at beginning of EXP command: False and False
6:19:40 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:19:40 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:19:40 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:19:40 PM - BIAS/FLAT Object Alt: 20
6:19:42 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:19:42 PM - Imaging sky for 20 seconds.
6:19:42 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:19:42 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:19:42 PM - Exposing image C:\Users\Bell\Data\k260128-0036.fit
6:19:42 PM - PWI Status page writing to logtest file
6:19:42 PM - Writing mount apparent RA: 02:21:26.70216578244
6:19:42 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:19:42 PM - Writing mount J2000 RA: 02:05:05.3369145042
6:19:42 PM - Writing mount J2000 Dec: -33:11:55.31347699188
6:19:42 PM - Dome going to scope azimuth: 181.999775086026
6:20:03 PM - Starting image save...
6:20:04 PM - Saved image C:\Users\Bell\Data\k260128-0036.fit
6:20:04 PM - Running Error Check.
6:20:04 PM - No errors present.
6:20:04 PM - Changing Flat Field Screen light power to 100
6:20:04 PM - Running Error Check.
6:20:04 PM - No errors present.
6:20:04 PM - From target list, waiting for 2 seconds.
6:20:06 PM - Running Error Check.
6:20:06 PM - No errors present.
6:20:06 PM - Changing filter to position 9.
6:20:06 PM - Running Error Check.
6:20:06 PM - No errors present.
6:20:06 PM - ----------------------------------------
6:20:06 PM - Beginning Frame #27Acquisition
6:20:06 PM - ----------------------------------------
6:20:06 PM - Object from target list used for altcheck in EXP command is FLAT
6:20:06 PM - HasRA and HasDec at beginning of EXP command: False and False
6:20:06 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:20:06 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:20:06 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:20:06 PM - BIAS/FLAT Object Alt: 20
6:20:08 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:20:08 PM - Imaging sky for 20 seconds.
6:20:08 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:20:08 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:20:08 PM - Exposing image C:\Users\Bell\Data\k260128-0037.fit
6:20:08 PM - PWI Status page writing to logtest file
6:20:08 PM - Writing mount apparent RA: 02:28:00.50733989832
6:20:08 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:20:08 PM - Writing mount J2000 RA: 02:11:39.58090284012
6:20:08 PM - Writing mount J2000 Dec: -33:11:54.6402136956
6:20:08 PM - Dome going to scope azimuth: 181.999775086026
6:20:31 PM - Starting image save...
6:20:31 PM - Saved image C:\Users\Bell\Data\k260128-0037.fit
6:20:31 PM - Running Error Check.
6:20:31 PM - No errors present.
6:20:31 PM - ----------------------------------------
6:20:31 PM - Beginning Frame #28Acquisition
6:20:31 PM - ----------------------------------------
6:20:31 PM - Object from target list used for altcheck in EXP command is FLAT
6:20:31 PM - HasRA and HasDec at beginning of EXP command: False and False
6:20:31 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:20:31 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:20:31 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:20:31 PM - BIAS/FLAT Object Alt: 20
6:20:33 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:20:33 PM - Imaging sky for 20 seconds.
6:20:33 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:20:33 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:20:33 PM - Exposing image C:\Users\Bell\Data\k260128-0038.fit
6:20:33 PM - PWI Status page writing to logtest file
6:20:33 PM - Writing mount apparent RA: 02:34:20.39952534528
6:20:33 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:20:33 PM - Writing mount J2000 RA: 02:17:59.895605247
6:20:33 PM - Writing mount J2000 Dec: -33:11:53.9894324382
6:20:33 PM - Dome going to scope azimuth: 181.999775086026
6:20:55 PM - Starting image save...
6:20:56 PM - Saved image C:\Users\Bell\Data\k260128-0038.fit
6:20:56 PM - Running Error Check.
6:20:56 PM - No errors present.
6:20:56 PM - ----------------------------------------
6:20:56 PM - Beginning Frame #29Acquisition
6:20:56 PM - ----------------------------------------
6:20:56 PM - Object from target list used for altcheck in EXP command is FLAT
6:20:56 PM - HasRA and HasDec at beginning of EXP command: False and False
6:20:56 PM - Object is BIAS or FLAT.  Skipping ObjectAltCheck.  However, still writing object alt and az.
6:20:56 PM - Writing BIAS/FLAT obj alt to objectalt.txt.
6:20:56 PM - Assigning new BIAS/FLAT object alt to objalt variable
6:20:56 PM - BIAS/FLAT Object Alt: 20
6:20:58 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 20 degrees.
6:20:58 PM - Imaging sky for 20 seconds.
6:20:58 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:20:58 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:20:58 PM - Exposing image C:\Users\Bell\Data\k260128-0039.fit
6:20:58 PM - PWI Status page writing to logtest file
6:20:58 PM - Writing mount apparent RA: 02:40:23.80683742104
6:20:58 PM - Writing mount apparent Dec: -33:05:41.58774325932
6:20:58 PM - Writing mount J2000 RA: 02:24:03.70636861536
6:20:58 PM - Writing mount J2000 Dec: -33:11:53.3656944654
6:20:58 PM - Dome going to scope azimuth: 181.999775086026
6:21:19 PM - Starting image save...
6:21:20 PM - Saved image C:\Users\Bell\Data\k260128-0039.fit
6:21:20 PM - Running Error Check.
6:21:20 PM - No errors present.
6:21:21 PM - End of FlatFieldList.txt.
6:21:21 PM - Running Error Check.
6:21:21 PM - No errors present.
6:21:21 PM - ----------------------------------------
6:21:21 PM - Light Frame Acquisition: Startup
6:21:21 PM - ----------------------------------------
6:21:21 PM - Running Error Check.
6:21:21 PM - No errors present.
6:21:21 PM - Flat field outlet turned off
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:22 PM - Running Error Check.
6:21:22 PM - No errors present.
6:21:24 PM - New destination read in target list: C:\Users\Bell\Data\.
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - New observer read in target list: Michael Carini.
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - Changing image type to LightFrame
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - Changing filter to position 3.
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - HMSToHours RA from TargetList is 1.38580555555556
6:21:24 PM - Given (unmodded) RA from TargetList is 01h 23m 08.9s
6:21:24 PM - HasRA value after reading RA line from target list: True
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - DMSToDegrees Dec from TargetList is 34.3472222222222
6:21:24 PM - Given (unmodded) Dec from TargetList is 
6:21:24 PM - HasDec value after reading Dec line from target list: True
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - New object read in target list: 3C 454.3.
6:21:24 PM - Running Error Check.
6:21:24 PM - No errors present.
6:21:24 PM - ----------------------------------------
6:21:24 PM - Beginning Frame #0Acquisition
6:21:24 PM - ----------------------------------------
6:21:24 PM - Object from target list used for altcheck in EXP command is 3C 454.3
6:21:24 PM - HasRA and HasDec at beginning of EXP command: True and True
6:21:24 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:21:26 PM - Assigning new object alt to objalt variable
6:21:26 PM - Object Alt: 20
6:21:27 PM - objalt < 30.  Running ObjectAltCheck again to determine if object is rising or setting.  Current objalt: 20
6:21:27 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:21:29 PM - Assigning new object alt to objalt variable
6:21:29 PM - Object Alt: 69.69735
6:21:29 PM - Object (still) rising.  Waiting 300s.
6:21:44 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:21:46 PM - Assigning new object alt to objalt variable
6:21:46 PM - Object Alt: 69.69735
6:21:46 PM - After waiting 300s, new object alt is 69.69735
6:21:46 PM - Object finally above 30 degrees after waiting to rise.
6:21:48 PM - Moon distance to next object: 57.7336265350679
6:21:48 PM - Moon is far enough away!
6:21:48 PM - MoonGood = True; good to observe.
6:21:48 PM - Dome azimuth is 181.9 degrees.  Object azimuth is 69.69735 degrees.
6:21:48 PM - Imaging sky for 2 seconds.
6:21:48 PM - HasRA (during PrepareToImage Sub): TrueHasDec (during PrepareToImage Sub): True
6:21:48 PM - New RA/Dec object slew
6:22:18 PM - Dome going to scope azimuth: 270.705177513608
6:22:18 PM - Dome still more than 1 degree away from scope; Dome Azimuth: 181.9
6:22:29 PM - Dome still more than 1 degree away from scope; Dome Azimuth: 209.93
6:22:39 PM - Dome still more than 1 degree away from scope; Dome Azimuth: 250.25
6:22:49 PM - New RA (hour decimal):1.38580555555556
6:22:49 PM - New Dec (deg decimal):34.3472222222222
6:22:49 PM - Exposing image C:\Users\Bell\Data\k260128-0040.fit
6:22:49 PM - PWI Status page writing to logtest file
6:22:49 PM - Writing mount apparent RA: 01:09:20.18073539484
6:22:49 PM - Writing mount apparent Dec: 34:29:10.42053566496
6:22:49 PM - Writing mount J2000 RA: 01:47:13.81256872512
6:22:49 PM - Writing mount J2000 Dec: 34:20:50.07227291628
6:22:49 PM - Dome going to scope azimuth: 270.777651325517
6:22:56 PM - Starting image save...
6:22:57 PM - Saved image C:\Users\Bell\Data\k260128-0040.fit
6:22:57 PM - Running Error Check.
6:22:57 PM - No errors present.
6:22:57 PM - ----------------------------------------
6:22:57 PM - Beginning Frame #1Acquisition
6:22:57 PM - ----------------------------------------
6:22:57 PM - Object from target list used for altcheck in EXP command is 3C 454.3
6:22:57 PM - HasRA and HasDec at beginning of EXP command: False and False
6:22:57 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:22:59 PM - Assigning new object alt to objalt variable
6:22:59 PM - Object Alt: 69.64008
6:23:00 PM - Object higher than dome slit; good to observe.
6:23:02 PM - Moon distance to next object: 57.7463882122695
6:23:02 PM - Moon is far enough away!
6:23:02 PM - MoonGood = True; good to observe.
6:23:02 PM - Dome azimuth is 270.78 degrees.  Object azimuth is 69.64008 degrees.
6:23:02 PM - Imaging sky for 2 seconds.
6:23:02 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:23:02 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:23:02 PM - Exposing image C:\Users\Bell\Data\k260128-0041.fit
6:23:02 PM - PWI Status page writing to logtest file
6:23:02 PM - Writing mount apparent RA: 01:09:19.78056073728
6:23:02 PM - Writing mount apparent Dec: 34:29:10.31949185604
6:23:02 PM - Writing mount J2000 RA: 01:47:13.4132600148
6:23:02 PM - Writing mount J2000 Dec: 34:20:49.97090937228
6:23:02 PM - Dome going to scope azimuth: 270.810227607222
6:23:06 PM - Starting image save...
6:23:06 PM - Saved image C:\Users\Bell\Data\k260128-0041.fit
6:23:06 PM - Running Error Check.
6:23:06 PM - No errors present.
6:23:06 PM - ----------------------------------------
6:23:06 PM - Beginning Frame #2Acquisition
6:23:06 PM - ----------------------------------------
6:23:06 PM - Object from target list used for altcheck in EXP command is 3C 454.3
6:23:06 PM - HasRA and HasDec at beginning of EXP command: False and False
6:23:06 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:23:08 PM - Assigning new object alt to objalt variable
6:23:08 PM - Object Alt: 69.36536
6:23:09 PM - Object higher than dome slit; good to observe.
6:23:12 PM - Moon distance to next object: 57.7479953255714
6:23:12 PM - Moon is far enough away!
6:23:12 PM - MoonGood = True; good to observe.
6:23:12 PM - Dome azimuth is 270.78 degrees.  Object azimuth is 69.36536 degrees.
6:23:12 PM - Imaging sky for 2 seconds.
6:23:12 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:23:12 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:23:12 PM - Exposing image C:\Users\Bell\Data\k260128-0042.fit
6:23:12 PM - PWI Status page writing to logtest file
6:23:12 PM - Writing mount apparent RA: 01:09:20.01347564436
6:23:12 PM - Writing mount apparent Dec: 34:29:10.39525994508
6:23:12 PM - Writing mount J2000 RA: 01:47:13.64569711944
6:23:12 PM - Writing mount J2000 Dec: 34:20:50.046880461
6:23:12 PM - Dome going to scope azimuth: 270.832563200251
6:23:15 PM - Starting image save...
6:23:16 PM - Saved image C:\Users\Bell\Data\k260128-0042.fit
6:23:16 PM - Running Error Check.
6:23:16 PM - No errors present.
6:23:16 PM - Running Error Check.
6:23:16 PM - No errors present.
6:23:16 PM - Running Error Check.
6:23:16 PM - No errors present.
6:23:16 PM - HMSToHours RA from TargetList is 2.38580555555556
6:23:16 PM - Given (unmodded) RA from TargetList is 02h 23m 08.9s
6:23:16 PM - HasRA value after reading RA line from target list: True
6:23:16 PM - Running Error Check.
6:23:16 PM - No errors present.
6:23:16 PM - DMSToDegrees Dec from TargetList is 34.3472222222222
6:23:16 PM - Given (unmodded) Dec from TargetList is +34d 20m 50s
6:23:16 PM - HasDec value after reading Dec line from target list: True
6:23:16 PM - Running Error Check.
6:23:16 PM - No errors present.
6:23:16 PM - New object read in target list: Test1.
6:23:16 PM - Running Error Check.
6:23:16 PM - No errors present.
6:23:16 PM - ----------------------------------------
6:23:16 PM - Beginning Frame #3Acquisition
6:23:16 PM - ----------------------------------------
6:23:16 PM - Object from target list used for altcheck in EXP command is Test1
6:23:16 PM - HasRA and HasDec at beginning of EXP command: True and True
6:23:16 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:23:18 PM - Assigning new object alt to objalt variable
6:23:18 PM - Object Alt: 69.36536
6:23:19 PM - Object higher than dome slit; good to observe.
6:23:21 PM - Moon distance to next object: 56.76145741622
6:23:21 PM - Moon is far enough away!
6:23:21 PM - MoonGood = True; good to observe.
6:23:21 PM - Dome azimuth is 270.78 degrees.  Object azimuth is 69.36536 degrees.
6:23:21 PM - Imaging sky for 2 seconds.
6:23:21 PM - HasRA (during PrepareToImage Sub): TrueHasDec (during PrepareToImage Sub): True
6:23:21 PM - New RA/Dec object slew
6:23:51 PM - Dome going to scope azimuth: 257.013115933699
6:23:51 PM - Dome still more than 1 degree away from scope; Dome Azimuth: 270.78
6:24:01 PM - New RA (hour decimal):2.38580555555556
6:24:01 PM - New Dec (deg decimal):34.3472222222222
6:24:01 PM - Exposing image C:\Users\Bell\Data\k260128-0043.fit
6:24:01 PM - PWI Status page writing to logtest file
6:24:01 PM - Writing mount apparent RA: 02:10:49.2876053598
6:24:01 PM - Writing mount apparent Dec: 34:28:07.2007587552
6:24:01 PM - Writing mount J2000 RA: 02:47:13.35128528364
6:24:01 PM - Writing mount J2000 Dec: 34:20:49.976895615
6:24:01 PM - Dome going to scope azimuth: 257.088034718653
6:24:05 PM - Starting image save...
6:24:06 PM - Saved image C:\Users\Bell\Data\k260128-0043.fit
6:24:06 PM - Running Error Check.
6:24:06 PM - No errors present.
6:24:06 PM - ----------------------------------------
6:24:06 PM - Beginning Frame #4Acquisition
6:24:06 PM - ----------------------------------------
6:24:06 PM - Object from target list used for altcheck in EXP command is Test1
6:24:06 PM - HasRA and HasDec at beginning of EXP command: False and False
6:24:06 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:24:08 PM - Assigning new object alt to objalt variable
6:24:08 PM - Object Alt: 81.27066
6:24:09 PM - Object higher than dome slit; good to observe.
6:24:11 PM - Moon distance to next object: 56.7701033540642
6:24:11 PM - Moon is far enough away!
6:24:11 PM - MoonGood = True; good to observe.
6:24:11 PM - Dome azimuth is 257.03 degrees.  Object azimuth is 81.27066 degrees.
6:24:11 PM - Imaging sky for 2 seconds.
6:24:11 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:24:11 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:24:11 PM - Exposing image C:\Users\Bell\Data\k260128-0044.fit
6:24:11 PM - PWI Status page writing to logtest file
6:24:11 PM - Writing mount apparent RA: 02:10:49.71548567352
6:24:11 PM - Writing mount apparent Dec: 34:28:07.29704179236
6:24:11 PM - Writing mount J2000 RA: 02:47:13.77832671492
6:24:11 PM - Writing mount J2000 Dec: 34:20:50.07380067384
6:24:11 PM - Dome going to scope azimuth: 257.161848557276
6:24:15 PM - Starting image save...
6:24:15 PM - Saved image C:\Users\Bell\Data\k260128-0044.fit
6:24:15 PM - Running Error Check.
6:24:15 PM - No errors present.
6:24:15 PM - ----------------------------------------
6:24:15 PM - Beginning Frame #5Acquisition
6:24:15 PM - ----------------------------------------
6:24:15 PM - Object from target list used for altcheck in EXP command is Test1
6:24:15 PM - HasRA and HasDec at beginning of EXP command: False and False
6:24:15 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:24:17 PM - Assigning new object alt to objalt variable
6:24:18 PM - Object Alt: 81.07654
6:24:19 PM - Object higher than dome slit; good to observe.
6:24:21 PM - Moon distance to next object: 56.7717104428337
6:24:21 PM - Moon is far enough away!
6:24:21 PM - MoonGood = True; good to observe.
6:24:21 PM - Dome azimuth is 257.03 degrees.  Object azimuth is 81.07654 degrees.
6:24:21 PM - Imaging sky for 2 seconds.
6:24:21 PM - HasRA (during PrepareToImage Sub): FalseHasDec (during PrepareToImage Sub): False
6:24:21 PM - No True HasRA, HasDec, Hasalt, or Hasaz, so skipping scope movement.
6:24:21 PM - Exposing image C:\Users\Bell\Data\k260128-0045.fit
6:24:21 PM - PWI Status page writing to logtest file
6:24:21 PM - Writing mount apparent RA: 02:10:49.23240906648
6:24:21 PM - Writing mount apparent Dec: 34:28:07.17055252608
6:24:21 PM - Writing mount J2000 RA: 02:47:13.29629525196
6:24:21 PM - Writing mount J2000 Dec: 34:20:49.94662212816
6:24:21 PM - Dome going to scope azimuth: 257.229470128813
6:24:24 PM - Starting image save...
6:24:25 PM - Saved image C:\Users\Bell\Data\k260128-0045.fit
6:24:25 PM - Running Error Check.
6:24:25 PM - No errors present.
6:24:25 PM - Running Error Check.
6:24:25 PM - No errors present.
6:24:25 PM - Running Error Check.
6:24:25 PM - No errors present.
6:24:25 PM - HMSToHours RA from TargetList is 20.3358055555556
6:24:25 PM - Given (unmodded) RA from TargetList is 20h 20m 08.9s
6:24:25 PM - HasRA value after reading RA line from target list: True
6:24:25 PM - Running Error Check.
6:24:25 PM - No errors present.
6:24:25 PM - DMSToDegrees Dec from TargetList is 20
6:24:25 PM - Given (unmodded) Dec from TargetList is +34d 20m 50s
6:24:25 PM - HasDec value after reading Dec line from target list: True
6:24:25 PM - Running Error Check.
6:24:25 PM - No errors present.
6:24:25 PM - New object read in target list: TestRiseSet.
6:24:25 PM - Running Error Check.
6:24:25 PM - No errors present.
6:24:25 PM - ----------------------------------------
6:24:25 PM - Beginning Frame #6Acquisition
6:24:25 PM - ----------------------------------------
6:24:25 PM - Object from target list used for altcheck in EXP command is TestRiseSet
6:24:25 PM - HasRA and HasDec at beginning of EXP command: True and True
6:24:25 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:24:27 PM - Assigning new object alt to objalt variable
6:24:27 PM - Object Alt: 3.26409
6:24:28 PM - Object alt < 15 degrees.  We're not waiting the whole night for this to rise!
6:24:28 PM - Running Error Check.
6:24:28 PM - No errors present.
6:24:28 PM - ----------------------------------------
6:24:28 PM - Beginning Frame #6Acquisition
6:24:28 PM - ----------------------------------------
6:24:28 PM - Object from target list used for altcheck in EXP command is TestRiseSet
6:24:28 PM - HasRA and HasDec at beginning of EXP command: True and True
6:24:28 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:24:30 PM - Assigning new object alt to objalt variable
6:24:30 PM - Object Alt: 3.254584
6:24:31 PM - Object alt < 15 degrees.  We're not waiting the whole night for this to rise!
6:24:31 PM - Running Error Check.
6:24:31 PM - No errors present.
6:24:31 PM - ----------------------------------------
6:24:31 PM - Beginning Frame #6Acquisition
6:24:31 PM - ----------------------------------------
6:24:31 PM - Object from target list used for altcheck in EXP command is TestRiseSet
6:24:31 PM - HasRA and HasDec at beginning of EXP command: True and True
6:24:31 PM - Writing obj RA and Dec to objectcoordsfile.txt for conversion
6:24:33 PM - Assigning new object alt to objalt variable
6:24:33 PM - Object Alt: 3.245
6:24:34 PM - Object alt < 15 degrees.  We're not waiting the whole night for this to rise!
6:24:34 PM - Running Error Check.
6:24:34 PM - No errors present.
6:24:34 PM - End of C:\Users\Bell\Desktop\TargetListDayTest.txt.  Closing the observatory.
6:24:34 PM - Running Error Check.
6:24:34 PM - No errors present.